1200485 - RP SATA nozzle 1.3i - JET X Digital Ready spraygun

Technical Specifications Spraygun JET X Digital Read RP 1.3 I

• Reference: SATA JET X Digital Read – nozzle I 1.3
• Type: gravity spraygun RP (Reduced Pressure) for water-based/solvent-based bases and HS/MS clears
• Nozzle / needle: stainless steel Ø 1.3 mm – compact jet with sharp edges
• Air cap: high-precision machined alloy, steady flow without pulsations
• Weight: 430 g (600 g with 0.6 l holder)
• Recommended inlet pressure: 2.0 bar (29 psi) – 1.7 bar at the cap
• Air consumption: 335 l/min at 2 bar (≈ 11.8 cfm)
• Digital pressure gauge: pressure display (bar/psi), ambient temperature, usage time, ±0.2 bar alert
• Air connection: rotating ¼″ NPS – Quick Adam Connector
• Integrated adjustments: product flow, jet width, micrometric air pressure
• Compatible substrates: steel, aluminum, primed plastics, sanded old paints
• Durability: anodized aluminum body, stainless fluid parts, solvent-resistant seals

Properties and Benefits

• Homogeneous "I" pattern: perfect finish on metallic and pearlescent bases
• High RP transfer: reduced overspray, product savings
• Integrated digital pressure gauge: instant adjustment, parameter traceability
• Lightweight and ergonomic handle: minimal fatigue during extended use
• Easy maintenance: fewer spare parts, quick disassembly without tools

Recommended Applications

• Spraying water-based or solvent-based bases, intermediate coats, and HS/MS clears
• Spot-repair work or full panels in pressurized booths
• Faithful reproduction of metallic/pearlescent effects on steel/aluminum sheets and primed plastics

Instructions for Use

1. Surface preparation: sanding P400–P600, silicone-free degreasing.
2. Product preparation: mix, adjust viscosity (TDS), filter 125 µm.
3. Initial settings: pressure 2 bar, product flow 1.5 turns, wide jet.
4. Application: distance 17 cm, cross passes (50% overlap).
5. Digital control: check pressure reading; adjust ±0.1 bar if needed.
6. Flash-off: follow paint data sheet (≈ 5 min base / 10 min clears at 20 °C).
7. Drying: 15 min base; clears 30 min at 60 °C depending on process.
8. Cleaning: purge circuit, rinse with suitable solvent, blow dry, lubricate seals.

Non-contractual photo

See all reviews.