Skip to content

+33 (0)1 48 17 05 19
at your service from 8 AM to 6 PM

T442 - PPG Envirobase High Performance Body Paint Brown 0.5L

Technical characteristics Brown T442 PPG

  • Reference: T442/E05
  • Range: Envirobase High Performance
  • Shade: Brown
  • Content: 0.5 Liter
  • Mixing ratios (by volume):
    • Opaque shades: 100:10 with thinner T494/T495
    • Mica shades: 100:20 with thinner T494/T495
    • Metallic shades: 100:20 to 30 with thinner T494/T495
  • Choice of thinner:
    • Temperatures below 35°C: T494
    • Temperatures above 35°C: T495
  • Spraying:
    • HVLP spraygun
    • Recommended nozzle: 1.2 mm to 1.4 mm
    • Application pressure: 2 to 2.2 bars
  • Application method:
    • Apply a first uniform coat
    • After complete drying, apply a second coat
    • Apply a placement coat on dry film (except opaque shades)
  • Evaporation time before varnishing: minimum 15 minutes, maximum 24 hours

Properties and advantages

  • Brown shade with precise and homogeneous reproduction of manufacturer colors
  • Envirobase system compatible with all shades and associated products
  • Excellent color matching thanks to RapidMatch Go, TouchMix Express and PaintManager XI tools
  • Waterborne formula with low VOC content, compliant with environmental standards
  • Fast drying: productivity gain and reduced time in the booth
  • Automated weighing system MOONWALK to limit product waste

Recommended applications

  • Reproduction of brown shades on bodywork
  • Creation of opaque, metallic or special effect finishes
  • Compatible with bases and finishes of the Envirobase High Performance system

Instructions for use

  • Surface preparation:
    • Dust and degrease the surface with a clean cloth and suitable products
  • Shade preparation:
    • Mix and dilute respecting the proportions according to the type of shade
    • Filter with a 125 µm cone before application
  • Equipment adjustment:
    • HVLP spraygun, nozzle 1.2 mm to 1.4 mm
    • Application pressure: 2 to 2.2 bars
  • Paint application:
    • Apply a first regular coat
    • After complete drying, apply a second coat
    • Finish with a placement coat on dry film (except for opaque colors)

Photo non contractuelle