P2P43 - Primer RM Plastic PLASTIC Fill - R Esense 1L

The primer PLASTIC Fill-R Grey P 2P43 is an eSense primer formulated for plastics used in bodywork. It enhances adhesion and prepares a smooth surface for a uniform and durable finish.

Advantages

• Enhanced adhesion on plastics before painting.
• Simple application: 1 light coat + 1 full coat.
• Fast drying in booth, easy dry sanding.

Technical Characteristics

• Color: Grey
• Family: eSense Primer (Pioneer Series)
• Mixing ratio: 4:1:1 (product: hardener: thinner)
• Pot life: approx. 3.5 h (at 20 °C)
• Number of coats: ½ + 1 (light coat + full coat)
• Dry film thickness: 30–40 µm
• Recommended nozzle: 1.3 to 1.4 mm
• Spray pressure: ≈ 2 bar
• DIN 4 viscosity (20 °C): approx. 17–19 s
• Oven drying: 60 °C – 30 min
• Sanding: dry, grit P400 to P600
• VOC ready to use: 539 g/L (EU limit: 540 g/L)
• Packaging: 1 L can

Application Method

1. Preparation: clean/degrease (e.g., SILICONE Remov-R), dust off. On dry and sanded substrate B 2P42.
2. Mixing: 4:1:1 with suitable hardener and thinner according to workshop conditions.
3. Application: nozzle 1.3–1.4 mm at 2 bar – 1 light coat then 1 full coat for 30–40 µm dry.
4. Drying: oven 60 °C for 30 min, dry sanding grit P400–P600 before finishing.

Compatible Substrates

Designed for major plastics used in bodywork (see R-M technical sheet for compatibilities and restrictions).

Safety

• Professional use only, PPE required.
• Contains fine particles (< 0.1 µm) – follow the SDS.
• Store away from moisture, close tightly after use.

Product Summary

The R-M P 2P43 optimizes adhesion on plastics before painting, with quick application and easy sanding. Compliant with VOC regulations, it integrates perfectly into efficient workshop cycles.

Non-contractual photo

See all reviews.