7502 - Microfiber Pad PRO RANGE 150mm

Technical characteristics Farecla G3 PRO 150 mm microfiber cutting pad

• Product name : G3 PRO Microfibre Cutting Pad 150 mm
• Brand / Reference : Farecla – 7502
• Product type : microfiber cutting pad for dual action polisher
• Nominal diameter : 150 mm (125 mm velcro backing plate)
• Foam core thickness : 10 mm rigid high density
• Fiber material : 15 mm polyester microfiber with high abrasion capacity
• Interface : velcro backing for quick attachment
• Product compatibility : G3 PRO D.A. Cutting Compound 7500 / 7506 / 7501; water or solvent-based polishes
• Recommended speed : 3000 – 5500 rpm orbits (DA polisher)
• Use : all types of OEM clears, ceramic clears, hard lacquers

Properties and benefits

• Fast cutting of sanding marks P1500 – P3000 without excessive heat
• Dense microfiber structure holding the compound on the surface for consistent action
• Rigid foam core ensuring uniform pressure on flat or curved panels
• Reduction of holograms compared to traditional wool pads
• Easy cleaning by blowing or brushing to extend lifespan

Recommended applications

• Correction of deep scratches, oxidation and light orange peel
• Rough work before fine polishing step G3 PRO D.A. Perfecting
• Work on hoods, roofs, tailgates and side panels that are cleared or painted

Instructions for use

1. Attach the pad to a 125 mm velcro backing plate of a dual action polisher.
2. Apply 3 – 4 dollops of G3 PRO compound on the pad.
3. Spread the product at low speed, then work zone by zone at 3000 – 5500 opm with moderate pressure.
4. Regularly clean the pad with a brush or compressed air to remove residues.
5. Wipe residues with a clean microfiber before moving to the finishing step.
6. Wash the pad with warm water and neutral soap, let dry in open air with fibers facing up.

Photo non contractuelle

See all reviews.