KIT_P190-6570 - AUTOCOLOR HS plus Clear Coat Kit P190-6570 5L + Standard Hardener P210-8645 2.5L

Nexa Autocolor P190-6570 5L automotive body clears HS

This clear is exclusively reserved for professional use in automotive repair

Ref: P190-6570

• Ref: P190-6570
• Range: Nexa Autocolor

Nexa Autocolor P190-6570 5L HS Clears is a premium product intended for automotive vehicle finishing.

How to apply it?

To apply the clears, it is important to follow these steps:

Surface preparation

The first step is to prepare the body surface. Make sure the surface is clean, dry, and free of dust, grease, or any other contaminants. If necessary, lightly sand the surface with fine abrasive paper.

Mixing the clears

Nexa Autocolor P190-6570 5L HS Clears must be mixed with an appropriate hardener and thinner before use. Follow the manufacturer's instructions to obtain the correct mixing ratio.

Application of the clears

Use a quality spray gun to apply the clears on the prepared surface. It is recommended to apply two to three coats of clears with an interval of 5 to 10 minutes between each coat.

Drying and finishing

Let the clears dry for at least 24 hours at room temperature. If necessary, you can speed up drying by using a hot air dryer or drying booth. Once the clears are completely dry, lightly sand the surface with an ultra-fine abrasive paper (P1500 to P2000) to remove any imperfections and polish the surface with a polishing compound and an electric polisher to achieve a shiny and flawless result.

Our tips for an optimal result

To achieve the best possible result with Nexa Autocolor brand Clears, we recommend following these tips:

• Work in a clean and well-ventilated environment to avoid contamination of the clears and ensure optimal drying.
• Wear appropriate personal protective equipment, such as gloves, glasses and eye protection, and a respirator mask, to protect yourself from fumes and clears splashes.
• Make sure the temperature and humidity of the working environment are suitable for applying the clears. Avoid applying the clears in cold or humid weather, as this can affect drying and the quality of the final result.
• Test the clears on a test surface before applying it to your vehicle to ensure the mixture is correct and the application is even.
• Be patient and meticulous when applying the clears and during the final polishing to achieve a professional and flawless result.

Do not hesitate to contact us for more information.

Photo non contractuelle

See all reviews.