KIT_8007_FAST - SPIES HECKER 8007 Varnish 5L + 3 fast hardeners 3007 1L DRAFT

The SPIES HECKER Permacron HS 8007 Fast clear coat kit is a professional solution for automotive bodywork clear coating. It includes 1 5-liter container of Permacron HS 8007 clear coat and 3 1-liter containers of Permacron HS 3007 Fast hardener. This high-solid two-component system provides a high-gloss finish, excellent leveling, and an even application. Thanks to the Fast 3007 hardener, it is particularly suitable for repairs on one or more panels, especially in application conditions of 15 to 20 °C.

Technical specifications

• Brand: SPIES HECKER
• Color-Box reference: KIT_8007_FAST
• Range: Permacron HS
• Type: high-solid 2K two-component clear coat kit
• Composition: 1 5L container of HS 8007 clear coat + 3 1L containers of Fast 3007 hardener
• Total volume: 8 liters of unmixed products
• Clear coat: Permacron HS Clear Coat 8007
• Hardener: Permacron HS Hardener 3007 Fast
• Finish: high gloss
• Mixing ratio by volume: 2:1 (2 parts clear coat to 1 part hardener)
• Recommended application temperature with 3007: 15 to 20 °C
• Application: 1 thin, closed coat followed by a normal coat
• Number of coats: 0.5 + 1 coat
• Recommended nozzle: 1.3 to 1.4 mm
• Compatible conventional spray gun pressure: 1.8 to 2.2 bars at the inlet
• HVLP pressure: 0.7 bar at atomization
• Intermediate flash-off: 0 to 2 minutes
• Final flash-off: 5 to 10 minutes before forced drying
• Dry film thickness: approximately 50 to 60 µm
• Drying at 20 °C: approximately 12 to 16 hours
• Forced drying at 60–65 °C: approximately 30 to 40 minutes at panel temperature
• Compatible substrates: compatible Permahyd matte bases and properly prepared older finishes
• VOC compliance: maximum 420 g/L ready to use according to the technical data sheet
• Use: professional automotive bodywork

Benefits

• Complete kit: includes 5 liters of clear coat and 3 liters of fast hardener.
• High-gloss finish: provides a high-quality aesthetic finish on bodywork panels.
• Excellent leveling: promotes a smooth and uniform surface after application.
• Fast 3007 hardener: suitable for repairs on one or more panels.
• Suitable for moderate temperatures: particularly recommended for application conditions of 15 to 20 °C.
• Easy mixing: mixing ratio of 2 parts clear coat to 1 part hardener.
• Good vertical stability: makes clear coating bodywork panels easier.
• 1.5-coat application: allows for an even finish with a thin first coat followed by a normal coat.
• Versatile: suitable for partial repairs and full panels.
• Professional quality: meets the daily needs of bodywork shops.

Recommended applications

• Clear coating automotive bodywork panels.
• Repairs on one or more panels.
• Clear coating properly prepared doors, wings, hoods, and bumpers.
• Work requiring a fast hardener.
• Applications carried out in moderate temperature conditions.
• Application on compatible Permahyd matte bases.
• Partial repairs requiring a high-gloss finish.
• Professional workshop finishing work.

Application and advice

• Check the compatibility of the clear coat with the matte base used.
• Allow the base to dry and flash off completely according to its technical data sheet.
• On a compatible older finish, perform the necessary sanding and degreasing.
• Thoroughly mix the clear coat before preparation.
• Mixing ratio: mix 2 parts Permacron HS 8007 clear coat with 1 part Permacron HS 3007 Fast hardener.
• Prepare only the quantity needed for application.
• Take into account the pot life indicated in the current technical data sheet.
• Use a spray gun equipped with a 1.3 to 1.4 mm nozzle.
• Set the pressure according to the type of spray gun and the manufacturer's recommendations.
• Apply a thin, closed first coat.
• Allow an intermediate flash-off of 0 to 2 minutes depending on conditions.
• Then apply a normal, even coat to achieve the desired leveling and gloss.
• Allow to flash off for 5 to 10 minutes before forced drying.
• Adapt the drying cycle to the panel temperature and workshop conditions.
• Do not pour the ready-to-use mixture back into the original clear coat container.
• Immediately close the hardener containers after use.
• For complete parameters, consult the SPIES HECKER Permacron HS 8007 technical data sheet.
• Also discover the SPIES HECKER clear coats available on Color-Box.
• Wear personal protective equipment suitable for two-component clear coats, especially appropriate respiratory protection.
• Work in a properly ventilated booth or area.
• Product strictly reserved for professional use.

Non-contractual photo

See all reviews.