HB961 - RM Satin White Bodywork Paint 0.5L

Technical characteristics Base tint White Satin RM HB961

• Brand : RM
• Reference : HB961
• Range : Onyx HD
• Product type : Metallic, opaque and pearlescent two-coat base tint to be recoated
• Tint : White Satin
• Content : 0.5 L
• Aspect : Uniform white satin finish to be recoated
• Formulation : High pigment concentration waterborne base, BASF pigments
• Application method : HVLP spray gun nozzle 1.4 – 1.5 mm, atomization pressure 0.7 bar at the cap
• Drying time : Fast drying between coats, complete sanding before clearcoating
• Material compatibility : Steel bodies, aluminum, prepared plastics, R-M primers
• VOC content : 150 g/L ready to use, compliant with European regulations (limit 420 g/L)
• Durability : Excellent mechanical, chemical and weather resistance after clearcoating

Properties and advantages

• Uniform and elegant white satin respecting manufacturer standards
• High covering power allowing application in few coats
• Excellent color purity thanks to BASF pigments
• Optimized colorimetric precision with Colormaster and Colortronic2 tools
• Reduced drying time facilitating workshop operations
• 80% reduction in solvent emissions compared to traditional systems

Recommended applications

• Repairs and finishes requiring a uniform white satin
• Restoration or local touch-up of passenger vehicles, commercial vehicles or compatible plastic parts
• Application on prepared metal or plastic surfaces
• Preparation before application of ultra gloss clearcoat, matte or satin

Instructions for use

• Prepare the surface: clean with PK2000, sand with P400 grit, final degreasing
• Mix 100% Onyx HD Base tint according to formula + 60% Hydromix by volume
• Filter using 190 μm cone filters
• Apply with HVLP spray gun nozzle 1.4 – 1.5 mm, atomization pressure 0.7 bar at the cap
• Apply 2 coats followed by a metal placement veil for the desired effect
• Allow each coat to dry properly until complete sanding
• Must be covered with an R-M clear: Glossclear, Rapidclear, Everclear for glossy finish or Silicatop, Satintop for matte or semi-matte finish
• Respect mixing ratios of clears/hardener/thinner and product temperature (18 to 25°C)
• Ensure precise gun adjustment, apply evenly without overloading
• Clean equipment immediately after use to avoid residues and defects

Photo non contractuelle

See all reviews.