HB150 - RM Bodywork Paint Medium Lenticular Aluminium 0.5L

Technical characteristics Base tint Aluminium Lenticulaire Medium RM HB150

• Brand : RM
• Reference : HB150
• Range : Onyx HD
• Product type : Two-coat metallic base tint to be recoated with clears
• Color : Aluminium Lenticulaire Medium
• Content : 0.5 L
• Aspect : Medium grain lenticular metallic finish
• Formulation : High concentration pigment waterborne system
• Application method : HVLP spray gun 1.4 - 1.5 mm, 0.7 bar pressure at the cap
• Drying time : Fast drying between coats with complete matting before clearcoating
• Material compatibility : Steel bodies, aluminium, prepared plastics, painted surfaces
• Durability : Excellent mechanical and chemical resistance after clearcoating
• VOC content : 150 g/L in ready-to-use mix, compliant with European regulations (limit value 420 g/L)

Properties and advantages

• Medium lenticular effect with uniform and precise metallic rendering
• High covering power thanks to optimized pigment concentration
• Colorimetric accuracy ensured by BASF pigments and Colortronic2 tools
• Fast drying promoting time saving in the workshop
• 80% reduction in solvent emissions compared to traditional systems
• Strict respect of manufacturer shades, compatible with current trends
• Ease of application with optimal positioning of metallic particles

Recommended applications

• Repairs and finishes requiring a medium aluminium lenticular effect
• Bodywork on light vehicles, commercial vehicles, or aluminium and compatible plastic parts
• Accurate reproduction of metallic, pearlescent and opaque manufacturer shades
• Preparation before application of ultra gloss clearcoat or matte clears

Instructions for use

• Prepare the surface: clean with PK2000, sand to P400 grit, final degreasing
• Filter the tint with 190 μm cone filters
• Mix: 100% Onyx HD Base tint according to formula + 60% Hydromix
• Apply with HVLP spray gun nozzle 1.4 - 1.5 mm, 0.7 bar pressure at the cap
• Apply 2 thin coats followed by a metal placement veil
• Allow evaporation between each coat and wait for complete matting before clearcoating
• Clearcoat with RM Glossclear, Rapidclear or Everclear (glossy finish) or Silicatop / Satintop (matte or semi-matte finish)
• Respect mixing ratios of clears/hardener/thinner and product temperature (18 to 25°C)
• Ensure precise gun adjustment, avoid overloading to limit runs
• Apply in a linear, regular manner at constant speed
• Clean equipment immediately after use to prevent defects

Photo non contractuelle

See all reviews.