Skip to content

+33 (0)1 48 17 05 19
at your service from 8 AM to 6 PM

AM34/0.5 - Direct gloss lacquer CROMAX CENTARI Green 0.5L

Technical characteristics Centari 5035 Green

  • Product name: Centari 5035 Green Direct Gloss
  • Brand: Axalta
  • Reference: AM34
  • Range: Centari 5035
  • Product type: 2K direct gloss lacquer, high solid content
  • Color: Green
  • Content: 0.5 Liter
  • Formula: Concentrated solvent-based base tint
  • Appearance: Glossy finish, excellent uniformity
  • Application method: HVLP spraygun, nozzle 1.3 to 1.5 mm
  • Thinning: 3 parts Centari paint to 1 part Cromax hardener (XK203, XK205 or XK206 depending on temperature)
  • Flash-off time: 5 minutes between coats
  • Recoating time: Recoatable after 24 h with sanding
  • Conditions of use: Degreased and prepared surfaces
  • Material compatibility: Steels, aluminum, prepared plastics
  • Compliance: VOC standards, strictly for professional use

Properties and benefits

  • Direct glossy finish without need for additional clears
  • Bright and deep color with high colorimetric precision
  • Very good resistance to UV and atmospheric agents
  • High solids formulation for optimized yield
  • Suitable for localized touch-ups, part repairs, and complete paints
  • Reduction of VOC emissions, compliance with environmental standards
  • Ease of application with standard workshop equipment

Recommended applications

  • Body repair and touch-up work
  • Complete or partial painting of passenger cars and commercial vehicles
  • Application on prepared metal or plastic surfaces
  • Use in professional paint booth

Instructions for use

  • Preparation: Clean and degrease the surface with 3919S, sand the sealers and primers with P500
  • Additional sanding: Repair areas with P500-P600 using a 5 mm orbital sander, finish with P800-P1000 using 2.5 mm eccentricity
  • Mixing: 3 parts Centari paint with 1 part hardener adapted to the temperature
  • Application: HVLP spraygun nozzle 1.3 to 1.5 mm, pressure 0.7 bar at the nozzle and 1.8 to 2.2 bar at the inlet gauge
  • Spraying: 2 thin coats with 5 minutes flash-off between each coat
  • Drying: In booth or with short-wave infrared, recoatable after 24 h with sanding

Photo non contractuelle