A-U-59 - GLASURIT Black Primer - primer filler 3L

Technical characteristics A-U-59 Eco Balance

• Product name : A-U-59, unspecified brand, Eco Balance range
• Product type : Sandable black primer-sealer
• Formulation : Low environmental impact solvents (VOC: 539 g/l)
• Color : Black
• Compatible substrates : original parts with cataphoresis, old paints, GRP/SMC, steel, galvanized steel, aluminum (bare areas pre-primed)
• Mixing ratio : 4 volumes of A-U-59 / 1 volume of hardener A-H-200 / 1 volume of thinner (A-R-125, A-R-110, A-R-120 or A-R-130)
• Application viscosity : 18–23 s (DIN 4 at 20°C)
• Pot life : 60 minutes at 20°C
• Number of coats : 2
• Dry film thickness : 50–70 µm
• Flash-off time between coats : Until matt
• Drying : 3 h at 20°C / 20 min at 60°C / 9 min by short wave IR
• Sanding : Dry orbital sander P400–P600

Properties and benefits

• Enhanced anticorrosion protection
• Very good resistance to weather conditions
• Excellent sanding and finishing quality
• Low environmental impact formulation (Eco Balance)
• Easy and even application with spray gun
• Compatibility with A-U-53 for greyshade creation

Recommended applications

• Automotive repairs on steel, aluminum, plastics and composites
• Fast repair cycles
• Preparation before painting with optimization of base coats
• Can be used as a single primer or combined with A-U-53

Instructions for use

1. Shake the product well before use
2. Mix according to the 4:1:1 ratio with hardener A-H-200 and a suitable thinner
3. Apply 2 coats with low pressure gravity feed or HVLP spray gun
4. Use a pressure of 2 bar – nozzle: 1.6–1.8 mm (LP) or 1.7–1.9 mm (HVLP)
5. Respect a flash-off time between coats until matt
6. Proceed with drying according to ambient temperature, baking or IR
7. Sand dry with an orbital sander P400 to P600

Safety advice

• Reserved for professionals
• Respect ventilation standards in the booth
• Wear personal protective equipment (gloves, goggles, FFP3 mask)
• Product containing VOCs: 539 g/l (European limit: 540 g/l, category IIB.c I)
• May contain particles < 0.1 µm

Photo non contractuelle

See all reviews.