Skip to content

+33 (0)1 48 17 05 19
at your service from 8 AM to 6 PM

Cart 1

680252 - SPRAY MAX 1K Aerosol for stone chip protection 600ml

Technical Specifications SprayMax 1K Black Anti-Chip Aerosol 600 ml

  • Brand: SprayMax
  • Reference: 680252
  • Contents: 600 ml
  • Product type: 1K anti-chip protection
  • Color: Black
  • Finish: Matte and textured
  • Composition: Synthetic resin and rubber
  • Packaging: Aerosol
  • Number of coats: 2 to 3 overlapping coats
  • Application thickness: Approximately 300 to 450 µm
  • Time between coats: 3 to 5 minutes
  • Touch dry: Approximately 2 hours
  • Fully dry: Approximately 24 hours
  • Recoatable: After 2 to 4 hours at 20 °C
  • Compatibility: 1K and 2K paint systems

Product Overview

The SprayMax 680252 1K Black Anti-Chip is a professional protective coating specially designed to preserve exposed parts of the vehicle bodywork against external damage. Its synthetic resin and rubber formulation forms a flexible, strong, and durable protective layer.

Ideal for sills, wheel arches, spoilers, rear skirts, and underbody panels, this aerosol effectively protects against stone chips, abrasion, road salt, moisture, and corrosion.

Its textured matte black finish allows it to replicate original equipment manufacturer (OEM) protections, from fine to highly pronounced structures. Easy to apply, it is a practical solution for localized repairs and bodywork protection.

Key Benefits

  • Durable anti-chip protection: effectively protects areas exposed to stone impacts and road debris.
  • Excellent corrosion resistance: helps preserve surfaces against moisture, salt, rust, and weather damage.
  • Very high elasticity: forms a flexible coating resistant to mechanical stress.
  • High abrasion resistance: particularly suitable for heavily stressed areas.
  • Superior adhesion: compatible with many properly prepared metal substrates and automotive surfaces.
  • Textured matte black finish: replicates original equipment manufacturer protection textures.
  • Fast drying: touch dry after approximately 2 hours and recoatable after 2 to 4 hours at 20 °C.
  • Recoatable with 1K and 2K paints: allows for a finish suitable for automotive repair.
  • Practical aerosol application: ideal for localized repairs without additional spray equipment.

Recommended Substrates and Applications

The SprayMax 680252 anti-chip protection can be applied to various substrates after they have been cleaned and sanded:

  • Steel and galvanized steel.
  • Aluminum and anodized aluminum.
  • Fiber-reinforced polymer (FRP) materials.
  • Polyester surfaces.
  • Electrostatic coatings.
  • Older paints and original equipment manufacturer paints.

It is particularly suitable for protecting the sills, wheel arches, spoilers, rear skirts, and exterior bodywork elements of cars, trucks, caravans, and other vehicles.

Application Instructions

Substrate preparation: carefully clean, degrease, and sand the surface. Remove all traces of rust, dust, and moisture before application.

Aerosol preparation: shake vigorously for 3 minutes once the mixing balls are audible. Perform a test spray to check compatibility with the substrate.

Application: hold the aerosol as vertically as possible, at a distance of 20 to 30 cm. Apply 2 to 3 overlapping coats to achieve a thickness of approximately 300 to 450 µm. Allow 3 to 5 minutes for each coat to evaporate between applications.

Recommended conditions: ideally apply at a temperature between 18 and 25 °C, with a relative humidity of 40 to 60%.

Drying: the coating is touch dry after approximately 2 hours and fully dry after approximately 24 hours. It can be recoated with a 1K or 2K paint system after 2 to 4 hours at 20 °C.

After use: turn the aerosol upside down and spray for 3 to 5 seconds to clean the valve.

Precautions: do not spray on the engine, transmission, brakes, or exhaust pipes. Wear suitable personal protective equipment. Product intended for professional use only.

Non-contractual photo

BODYSHOP NOTICE

BODYSHOP NOTICE