514195 - SIKKENS Yellow Spotprimer Aerosol 400 ml

SIKKENS Yellow Spotprimer 514195 is a fast-drying one-component primer supplied in a 400 ml aerosol. Designed for automotive refinishing professionals, it is suitable for small repairs on sanded areas and must be sanded before applying the topcoat.

Technical specifications

• Reference: 514195
• Brand: SIKKENS
• Range: Spotprimer
• Product type: Universal one-component aerosol primer
• Colour: Yellow
• Volume: 400 ml
• Application: Small repairs on sanded areas
• Number of coats: 2 to 3 even coats
• Film thickness: 20 to 30 µm with the recommended application
• Flash-off between coats: 5 to 10 minutes at 20 °C
• Drying: 30 minutes at 20 °C or 15 minutes at 60 °C
• Recoating: All SIKKENS topcoats, after sanding

Properties and benefits

• Fast drying: Suitable for localised repairs in bodyshops.
• Aerosol format: Direct application to small repair areas.
• Various substrates: Suitable for sanded areas of steel, existing finishes, polyester laminates and polyester primers for automotive bodywork.
• SIKKENS compatibility: Also suitable for Washprimer and Washfiller primers, SIKKENS surfacers, Polysurfacer and Primer Surfacer EP II.

Application and usage advice

• Clean the substrate with a suitable cleaner, sand with P220 to P320, then clean again. Avoid contact between exposed finishing putty and water or water-based degreaser.
• Shake the aerosol for several minutes after the mixing ball becomes free.
• Apply at 15 to 35 °C and a maximum relative humidity of 75%.
• Hold the aerosol approximately 12 to 18 cm from the substrate and apply 2 to 3 even coats, allowing 5 to 10 minutes of flash-off between coats at 20 °C.
• Allow to dry for 30 minutes at 20 °C or 15 minutes at 60 °C.
• Sanding before topcoating is mandatory: Use P500 dry or P1000 wet abrasive, then clean with a suitable product.
• After use, invert the aerosol and press the nozzle for 2 to 3 seconds to clear it.
• For professional use only. Wear appropriate protective equipment and suitable respiratory protection; the manufacturer recommends an air-fed respirator. Read the technical data sheet and safety data sheet before use.

Non-contractual photo

See all reviews.