121MWB - LESONAL Body Paint Metallic Large Glitter 1L

Technical characteristics Metallic Base Tint Large Glitter 1L

• Product reference : 121MWB
• Brand : Lesonal
• Range : Basecoat WB GT
• Product type : Waterborne matte base to be recoated
• Color : Large metallic glitter
• Content : 1 liter
• Formulation : Single-component water-based, low VOC content
• Ready to use : Yes (possible addition up to 40% Activator WB if hot/dry conditions)

Properties and advantages

• Marked glitter effect for a dynamic visual finish
• Fluid and regular application with fast drying to matte
• Full compatibility with Lesonal WB GT two-coat systems
• Usable for localized or full repairs
• Possibility to modulate with additives to adapt product behavior
• Formula compliant with environmental standards

Recommended applications

• Body repairs on passenger and utility vehicles
• Work on metallic shades with strong visual effect
• Localized touch-ups (spot repair) or full applications
• High-end finishes in booth with WB GT clears

Instructions for use

• Surface preparation : Clean with Lesonal Degreaser, sand with dry P500, then degrease again
• Mixing : Stir the pot gently before application to ensure good viscosity
• Opaque tint application : Apply 1 full coat, let dry to matte, repeat until opacity
• Metallic/pearl tint application : 1 wet coat + 1 thin coat + placement veil if needed
• Spot repair : Reduced pressure, successive thin coats, blend into remaining area
• Drying : Air dry until fully matte before clearcoating

Recommended equipment

• spraygun : HVLP with 1.3 or 1.4 nozzle according to recommendations
• Pressure : 0.6 – 0.7 bar at the cup, 1.7 – 2.2 bar at the nozzle

Protective equipment

• 3M 50425L paint suit (reusable) or 50198L (disposable)
• FFP3 respirator mask type 3M 06942
• Nitrile gloves to avoid any skin contact

Photo non contractuelle

See all reviews.