100.0074 - PALINAL 2K Hydro Connection Thinner 1L

Palinal 100.0074 – 1L Matching Thinner

Palinal 100.0074 is a product from the professional Palinal range, specially designed for bodywork and industrial painting applications. It ensures a consistent and reliable finish while meeting the productivity requirements of modern workshops.

Thanks to its high-quality formulation, it easily integrates into existing Palinal painting cycles and offers a simple, reproducible application compatible with the brand’s associated systems.

Advantages of Palinal 100.0074

• Professional Palinal quality for consistent and controlled results across all bodywork tasks.
• Simple and stable application, suitable for high-throughput workshops as well as occasional repairs.
• Compatibility with Palinal painting cycles (primers, base coats, clears, thinners, and hardeners from the range).
• Formulation designed to optimize workshop time: preparation, application, and drying time [to be adjusted according to TDS].
• Excellent film uniformity to facilitate finishing and reduce rework.

Usage Tips for Bodywork Professionals

1. Surface Preparation:
   – Sand and dull surfaces according to the substrate type (metal, composite, plastic, old system).
   – Thoroughly degrease with a suitable degreaser before and after sanding.
   – Remove all traces of dust, oil, silicone, or contamination.
2. Mix Preparation:
   – Follow the mixing ratio and type of hardener / thinner indicated on the Palinal 100.0074 technical data sheet.
   – Thoroughly homogenize the product before and after adding components.
3. Spray Application:
   – Use an HVLP or RP spray gun with a nozzle suitable for the product type [e.g., 1.2–1.4 mm clears / 1.6–1.8 mm primer].
   – Apply the recommended number of coats (mist + full coats), respecting evaporation times between passes.
4. Drying:
   – Allow to dry in air or in a paint booth according to the TDS (times and temperatures to be respected).
   – Do not handle or cover the film until drying is complete.
5. Sanding and Overcoating (if applicable):
   – Sand with abrasives suitable for the cycle (e.g., P400–P800 depending on the desired finish).
   – Dust off and degrease, then overcoat with the recommended Palinal products (base coats, clears, etc.).

Best Practices & Safety

• Product reserved for professional use in bodywork or industrial painting.
• Use appropriate personal protective equipment: gloves, filtering mask, goggles, coveralls, and ensure effective booth ventilation.
• Follow the instructions in the Palinal 100.0074 safety data sheet (SDS) for handling, storage, and disposal.
• Store the product in its original packaging, tightly closed, protected from frost, moisture, and heat sources.

Non-contractual photo

See all reviews.