1-16505 - DEBEER Primer Aerosol 1K light gray 400ml

Technical characteristics 1‑16505 Grey Shade 1K Spray Primer

• Name: Grey Shade 1K Spray Primer
• Brand: DeBeer (WaterBase 900+ Series Range)
• Reference: 1‑16505
• Content: 400 ml
• Product type: 1K spray primer, light grey shade (GS905), rub‑through primer to cover exposed metal areas
• Formula / color: Grey acrylic dispersion, matte finish
• Application: Spray — spraying distance 20‑25 cm, 1‑3 coats of 0.6‑1.4 mil
• Drying: flash‑off 2‑3 minutes at 20 °C, then :
• Air‑dry 20 °C: matte state, ready to handle, sand or cover after ~20 min
• Forced dry 60 °C: production time optimization
• Material compatibility: Bare metal, steel, galvanized, aluminum, well sanded flat surfaces (plastic, GRP, primer in good condition)
• Durability: Minimum storage 10 years at room temperature (10‑30 °C) in closed packaging
• VOC regulation: contains ≤ 718 g/L (≥ 6 lb/gal), compliant with Directive 2004/42/EC aerosol primer categories

Properties and advantages

• Immediate application without sanding needed in one coat, or light P800 sanding for topcoats
• Grey shade facilitating visual control of treated areas
• Fast drying (flash‑off 2–3 min), productivity gain
• Good adhesion on bare metal surfaces, aluminum and galvanized
• Extended durability (10 years) reducing waste and replacement costs
• Compliant with VOC standards, suitable for areas with strict regulations

Recommended applications

• Body repair: protection of exposed metal areas after sanding
• Sealing and preparation before base coat
• Use on prepared surfaces: steel, galvanized, aluminum, well sanded plastics, GRP and old primers in good condition

Instructions for use

1. Clean and degrease the surface (use appropriate cleaner, e.g. silicone remover)
2. Sand to remove waviness and imperfections (P400 or finer on primer, P800 if topcoats)
3. Shake the spray well before use
4. Spray at 20‑25 cm, 1‑3 even coats of 0.6‑1.4 mil, flash‑off 2‑3 min between coats
5. Final drying: 20 min at 20 °C (matte material), or forced cycle 60 °C as needed
6. After full flash‑off, sand lightly if necessary before applying base and clears
7. Clean the gun (if used) with recommended cleaner (9‑852 WaterBase Gun Cleaner)

Photo non contractuelle

See all reviews.