D6000 - PPG Deltron Progress Glossy White Body Paint 3.5L

Technical characteristics Brilliant Direct Lacquer D6000 Deltron Progress UHS DG

• Reference : D6000
• Range : Deltron Progress UHS DG
• Shade : Brilliant White
• Content : 3.5 Litres
• Product type : UHS direct gloss lacquer (Ultra High Solid)
• Formulation : High solid finish with excellent covering power
• Mixing mode : Ratio 2:1:0.6 (or 0.7) by volume with hardener and thinner

Choice of thinner according to baking :

• D8701 Standard additive thinner – Baking 10 min at 60°C
• D8701/2 Additive thinner – Baking 20 min at 60°C
• D8702 Slow additive thinner – Baking 30 min at 60°C

Application :

• HVLP spraygun with 1.3 mm to 1.4 mm nozzle
• Spray pressure: 2 to 2.2 bars
• Method: 2 single coats, 5 minutes evaporation between coats
• No intermediate drying before baking or infrared drying

Material compatibility : Original painted metals, partial or complete repairs, shades compatible with the Deltron Progress range

Finishes : Faithful reproduction of manufacturer shades with direct gloss

Properties and advantages

• Excellent covering power with reduced consumption
• Precise reproduction of original appearance and gloss
• Adaptability to repairs of all sizes
• Fast drying depending on the choice of hardener
• Excellent film tension and homogeneous gloss
• Smooth and uniform appearance without defects

Recommended applications

• Localized repairs and touch-ups on automotive bodywork
• Complete paints with direct gloss finish
• Compatible with metallic surfaces or prepared old paints
• Reproduction of Brilliant White shades from the Deltron Progress range

Instructions for use

1. Prepare the surface (degreasing and sanding according to standard procedures)
2. Mix according to the ratio 2:1:0.6 (or 0.7) by volume with suitable hardener and thinner
3. Choose the hardener according to the size of the repair :
• D8216 UHS Express – 10 min at 60°C – small repairs
• D8217 UHS Fast – 20 min at 60°C – medium surfaces
• D8218 UHS Slow – 30 min at 60°C – large surfaces and complete paints
4. Apply 2 single coats with 5 minutes evaporation between coats
5. Proceed directly to baking or infrared drying after application
6. Follow specific recommendations according to the additives used if matte or textured finishes are required

Photo non contractuelle

See all reviews.