02050311 - STANDOBLUE Base Connector 8580 Color Blend Slow 1L

Slow base tint blender for Standoblue two-coat auto body painting to be cleared

• These products are intended for professional use only

• Ref: 02050310
• Range: Standoblue

• Color blend slow additive for Standoblue base
• Slow

• Content: 1L

• VOC standards
• For paint blending in Standoblue
• Recommended for medium to large size flooded blend repairs at low humidity <30% and/or temperatures above 30°C

Binder for Standoblue base tint for two-coat auto body painting system to be cleared

• The great advantage of Standoblue paint is the application method of 1 wet coat of product and 1 placement coat.
• Before starting to paint, don’t forget to protect yourself with personal equipment such as a painting suit like the 3M 50198L, a paint vapor mask FFP2 3M 06942, and nitrile gloves.

Surface preparation of your auto body parts

• Degrease and clean your vehicle with water-based degreaser
• Old paint or original paint properly sanded and cleaned
• Primer or primer-surfacer, sanded
• Primer or primer-surfacer, unsanded in wet-on-wet process
• Don’t forget to degrease and clean your vehicle before applying paint with a solvent-based degreaser. Let solvents evaporate
• Areas to be repaired must be sanded with P500-P600 (machine) or P800-P1000 (by hand)

Preparation of your ready-to-use paint

• Stir your paint cans well with your agitators to achieve a ready-to-use tint strictly matching the original manufacturer’s color.
• You can add up to 10% demineralized water 8000
• For optimal application of your matte tint, spray within one hour after adding the viscosity adjuster
• Thanks to continuous development, Standoblue offers high levels of colorimetric precision. This is because colorimetric expertise, technological know-how, and adherence to the highest standards are all in our DNA.
• Standox helps your body shop achieve excellent results, whether for daily repairs or the most demanding ones.

Spraying your ready-to-use paint

• The Standoblue painting system allows significant savings in product and energy because you spray your base with the method of 1 wet coat of paint + 1 placement coat
• The first coat is a closed coat that must reach coverage between 70 and 80%.
• For the placement coat, also called half coat, step back so your spraying distance is longer than for the first full coat.
• Overlap passes in the still-wet film of your first coat. This coat helps properly place metal particles and ensures correct tint placement.
• Choose a paint gun with an HVLP cap and a 1.2 or 1.3 nozzle according to the recommendations of the paint gun manufacturer you select.
• We recommend the Satajet X5500 HVLP 1.2 nozzle ref 166364 or the Devilbiss DVI
• You can start the clears phase! Prefer Standox clears such as Easy K9510 for a very good entry-level, easy-to-use 2:1 or 1:1 clears, or a higher-end clear like XTRA clear K9560.
• Standoblue product features from Standox
• Opaque and effect tints using advanced pigment technology.
• Exceptional colorimetric precision.
• Excellent control of mottling.
• Remarkable flow properties.
• Good blending characteristics allowing smooth transitions and invisible repairs.
• Application flexibility.
• Fast application in a single spraying operation.

Non-contractual photo

See all reviews.