TSP1500 - Gray - UV 1K Primer FINIXA spray 400ml

Safety data sheet Technical data sheet

FINIXA

TSP1500

59,90€ excl. VAT

59,90€ excl. VAT 62,85€ excl. VAT

-4%

or 71,88€ incl. VAT

In stock

- Expected delivery on

An emergency? Call us at +33 (0)1 48 17 05 19

1K UV Primer Grey – Aerosol 400 ml is a 1K photopolymerizable primer specially designed for quick touch-ups in auto body repair. It cures under UV-A (365–395 nm) for almost immediate sanding, providing a smooth finish and excellent coverage thanks to its grey shade, facilitating surface inspection before painting.

Color : Gray

100% secure payment

TSP1500 - Gray - UV 1K Primer FINIXA spray 400ml

59,90€ excl. VAT

59,90€ excl. VAT 62,85€ excl. VAT

or 71,88€ incl. VAT

Technical Characteristics

Brand: Not specified
Capacity: 400 ml (spray)
Color: Gray
Type: 1K UV Primer (UV-A photopolymerizable)
Ultra-fast curing: UV-A curing for time savings in Spot Repair
1K ready to use: no mixing, activation only by UV
Optimized gray shade: better coverage, defect detection, and sanding guidance
Sandable finish: low absorption film, fine sanding, and base ready to paint
Adjustable nozzle: horizontal/vertical spray for clean and even application
Multi-substrate: steel, aluminum, galvanized, common plastics (adhesion promoter required on PP/PE)
Productivity & energy: very short cycles, no baking, energy saving

Usage Tips

Preparation: degrease, mattify (P320–P800 depending on area), dust off and dry. Adhesion promoter required on PP/PE.
Agitation: shake vigorously for 2 min, then a few seconds between passes.
Application: hold at 15–20 cm, 2–4 thin coats in cross passes; avoid over-thickness and shaded areas.
UV Curing: expose to a UV-A lamp 365–395 nm at a controlled distance; curing in a few minutes depending on power, thickness, and color of the substrate (follow the TDS).
Sanding / covering: after cooling, sand (P600–P800), dust off and apply the base/2K clears.
UV Safety: wear UV-protective glasses, gloves, A2/P3 mask, cover skin; never look at the UV source; ensure ventilation. Consult TDS/SDS.

Professional Summary

This 1K UV gray primer in 400 ml spray is ideal for body shops looking to perform quick and efficient touch-ups. Its UV curing allows for almost immediate sanding and precise finishing, while adhering to good safety practices.

Photo non contractuelle

Technical Specifications

Technical Characteristics

Brand: Not specified
Capacity: 400 ml (spray)
Color: Gray
Type: 1K UV Primer (UV-A photopolymerizable)
Ultra-fast curing: UV-A curing for time savings in Spot Repair
1K ready to use: no mixing, activation only by UV
Optimized gray shade: better coverage, defect detection, and sanding guidance
Sandable finish: low absorption film, fine sanding, and base ready to paint
Adjustable nozzle: horizontal/vertical spray for clean and even application
Multi-substrate: steel, aluminum, galvanized, common plastics (adhesion promoter required on PP/PE)
Productivity & energy: very short cycles, no baking, energy saving

Usage Tips

Preparation: degrease, mattify (P320–P800 depending on area), dust off and dry. Adhesion promoter required on PP/PE.
Agitation: shake vigorously for 2 min, then a few seconds between passes.
Application: hold at 15–20 cm, 2–4 thin coats in cross passes; avoid over-thickness and shaded areas.
UV Curing: expose to a UV-A lamp 365–395 nm at a controlled distance; curing in a few minutes depending on power, thickness, and color of the substrate (follow the TDS).
Sanding / covering: after cooling, sand (P600–P800), dust off and apply the base/2K clears.
UV Safety: wear UV-protective glasses, gloves, A2/P3 mask, cover skin; never look at the UV source; ensure ventilation. Consult TDS/SDS.