Skip to content

+33 (0)1 48 17 05 19
at your service from 8 AM to 6 PM

T457 - PPG Envirobase High Performance Green Pearl Body Paint 0.5L

Technical characteristics Green Pearl T457 PPG

  • Reference: T457
  • Range: Envirobase High Performance
  • Shade: Green Pearl
  • Content: 0.5 Liter
  • Choice of thinner:
    • Temperatures below 35°C: T494
    • Temperatures above 35°C: T495
  • Spraying:
    • HVLP spraygun
    • Recommended nozzle: 1.2 mm to 1.4 mm
    • Application pressure: 2 to 2.2 bars
  • Application method:
    • Apply a first uniform coat
    • After complete drying, apply a second coat
    • Apply a placement coat on dry film (except opaque shades)
  • Evaporation time before clear coating: minimum 15 minutes, maximum 48 hours

Properties and advantages

  • Advanced finishing system with excellent adhesion
  • High durability: resistant to wear, scratches, and weather conditions
  • Easy mixing and application without special additives for most repairs
  • Possibility to add the High Performance additive T492 for sensitive areas (stone chipping, etc.)
  • Compatible with Envirobase system shades and clears
  • Water-dilutable formulation compliant with European VOC reduction requirements

Recommended applications

  • Reproduction of Green Pearl pearlescent shades on bodywork
  • Localized or complete repairs requiring precise pearlescent finish
  • Compatible with PPG Envirobase finishing products and systems

Instructions for use

  • Shade selection:
    • Identify the exact color using the Envirobase Variants Color Chart or the RAPIDMATCH GO spectrophotometer
  • Mix preparation:
    • Respect mixing ratios according to the technical data sheet
    • Use the MOONWALK™ system for precise dosing
  • Surface preparation:
    • Clean, dry, and degreased surface
    • Light sanding with dry P500 or fine-grain abrasive pad
  • Paint application:
    • HVLP spraygun, nozzle 1.2 mm to 1.4 mm
    • Recommended inlet pressure: 2 to 2.2 bars
    • In standard process:
      • Apply a first base coat and let dry
      • Apply a second coat
      • Finish with a placement coat on dry film (except opaque shades) at 1.2 to 1.5 bars

Photo non contractuelle