T407 - PPG Envirobase High Performance Jet Black 2L Automotive Body Paint

Technical characteristics Waterborne Color T407 Envirobase High Performance

• Reference : T407
• Range : Envirobase High Performance
• Color : Jet Black
• Content : 2 Litres
• Product type : Intense black matte waterborne base
• Formulation : Premium pigments offering opacity, depth and gloss

Mixing ratio : 100 :10 by volume

Recommended thinners :

• T494 : Temperatures below 35°C
• T495 : Temperatures above 35°C

Application :

• HVLP spraygun with 1.2 mm to 1.4 mm nozzle
• Spray pressure: 2 to 2.2 bars
• Apply a first uniform coat
• After complete drying, apply a second coat
• Make a placement mist on dry film (except opaque colors)
• Evaporation time before clears: minimum 15 minutes, maximum 24 hours

Material compatibility : Automotive bodies, primers and prepared surfaces compatible with Envirobase waterborne systems

Standards compliance : Low VOC content, compliant with environmental regulations

Properties and benefits

• Intense black finish with excellent opacity
• Faithful reproduction of manufacturer colors
• Compatible with opaque, metallic, pearlescent or special effect colors
• Waterborne formula limiting VOC emissions and waste
• Uniform gloss and depth of color after clearing
• Finish quality validated by major manufacturers

Recommended applications

• Localized repairs or blends on automotive bodywork
• Complete paints with intense Jet Black finish
• Reproduction of manufacturer black colors according to PPG standards
• Use on metallic surfaces, old paints or properly prepared substrates

Instructions for use

1. Prepare the surface: cleaning, degreasing and sanding according to waterborne protocols
2. Select the color using a spectrophotometer or color chart
3. Mix the paint with the appropriate thinner, respecting the 100 :10 ratio
4. Shake the mixture well before application
5. Apply the first even coat with an HVLP spraygun (1.2 mm to 1.4 mm nozzle) at a pressure of 2 to 2.2 bars
6. After complete drying, apply the second coat
7. Make a placement mist on dry film (except opaque colors)
8. Respect a minimum evaporation time of 15 minutes before clearing, maximum 24 hours
9. Check the appearance and make blends if necessary

Photo non contractuelle

See all reviews.