ST312 - STANDOX Body Paint Fine Lenticular Aluminium 0.5L

Technical characteristics Fine Lenticular Aluminium Tint Standox Standohyd MIX 312

• Reference : MIX 312
• Brand : Standox
• Range : Standohyd
• Product type : Matte waterborne base tint to be recoated
• Color : Fine Lenticular Aluminium
• Content : 0.5 litre
• Composition : Concentrated tints and waterborne binders, compliant with European directive 2004
• Material compatibility : Light vehicles, prepared metal or plastic bodies
• Product compatibility : Standox Standohyd system with primers, surfacers and integrated clears
• Standards compliance : Low solvent content, product compliant with environmental requirements

Properties and advantages

• Excellent colorimetric performance and homogeneous metallization
• High opacity and reduced product consumption
• Flexible and uniform application, ready to use after mixing
• Suitable for flooded blend or edge to edge repair techniques
• Integrated system with Standox primers, surfacers and clears
• Environmentally friendly product, compliant with international regulations

Recommended applications

• High-end metallic finishes on light vehicles
• Body repairs requiring a Fine Lenticular Aluminium tint
• Two-coat painting work with finish to be recoated
• Use in professional body shop

Instructions for use

• Surface preparation :
  • Properly sand the old paint or original paint
  • Degrease with Standox Precleaner TB50
  • Sand the primer surfacer with P500 (machine) or P800 (manual)
  • Wet-on-wet option possible with unsanded primer
  • Finish with P800 using a 2.5 mm orbit pneumatic sander to avoid marks
  • Clean and degrease before application
• Product preparation :
  • Filter the paint with a 125 µm cone
  • Respect dilution with 8000 water according to recommendations
• Application :
  • Use an HVLP gun with 1.3 mm or 1.4 mm nozzle
  • Input pressure: 1.7 to 2 bars
  • Nozzle output pressure: 0.7 bar
  • Apply 2 wet coats then a placement mist to perfect the metallic effect
  • First coat uniform and closed
  • Step back for the second coat to position the effect and ensure proper tint orientation
  • Let dry until a matte finish is obtained
• Finishing : Apply the appropriate Standox clear after complete drying
• Personal protection : Wear coverall, FFP3 mask, nitrile gloves and appropriate equipment

Photo non contractuelle

See all reviews.