PROFILLER_GREY - Primer RM Grey polyurethane primer impression 4L

Technical characteristics Impression-Primer RM Profiller Grey 4 L

• Product: Impression-primer / Primer-filler 2 components (2K)
• Brand: RM Automotive Refinish Paints (BASF)
• Reference: Profiller Grey
• Color: Medium grey (shade from the greyshade guide: GC 50)
• Content: 4 liters
• Type: 2K polyurethane primer-filler
• Appearance: Matte grey film, excellent surface tension
• Application method: Spray gun (HVLP / gravity)
• Drying time: 3 h at 20 °C or 30 min at 60 °C, or 10 min with short-wave infrared – ready to sand P400-P500
• Usage conditions: Clean, degreased surface, steel, aluminum, galvanized, cataphoresis, sanded old paints, GRP/SMC composites
• Material compatibility: Metals, OEM substrates, rigid plastics according to recommendations
• Durability: Excellent adhesion and anticorrosion protection via polyurethane film

Properties and advantages

• 2K polyurethane formulation offering high mechanical and chemical resistance
• Very easy to sand film (dry or wet) P400-P500, better yield and time saving
• Uniform grey tint improving finish homogeneity
• Fast drying (3 h at 20 °C), optimized for R-M booth production rates
• Easy application thanks to good HVLP/gravity spraying
• Compatible with a wide range of R-M topcoat finishes (Onyx HD, Uno HD…)
• Supports direct application on small bare metal areas without prior primer layer

Recommended applications

• Base coat before painting on complete body or spare parts
• Dent repair, scratches, sanding, homogeneous prime layer
• Steel, galvanized, aluminum, composite (GRP/SMC) substrates
• Suitable for professional workshops using high-end R-M finishes

Instructions for use

• Prepare the surface: degrease, sand (P320–P400), carefully dust off
• Mix P 2E23 (primer filler grey) with the hardener H 2E23 at a 4:1:1 ratio (plus thinner R 2E10/20/30)
• Spray in two thin coats with flash-off between coats until matte, use 1.7–1.9 mm nozzle, pressure 2 bar (nozzle 0.7 bar)
• Drying: 3 h at 20 °C, 30 min at 60 °C or 10 min short wavelength infrared
• Dry or wet orbital sanding P400–P500, use a Guide Coat for better results

Photo non contractuelle

See all reviews.