A-U-48S - GLASURIT Dark Gray Primer - primer filler 400ml

This primer allows for a quick surface preparation before the following finishing steps.

Technical Characteristics

• Product type: Primer-sealer
• Color: Dark Gray
• Formulation: Ready to use
• Recommended use: Steel, galvanized steel, aluminum, original parts with cataphoresis, old paints, GRP / SMC
• Application: Spray
• Number of coats: 3 to 4
• Film thickness: 30 to 40 μm
• Flash-off at 20°C: About 5 minutes between coats
• Drying time at 20°C: 1.5 to 2 hours
• Drying time at 60°C: 30 minutes
• Drying under IR radiation (short waves): 5 minutes at 50%

Product Advantages

• Effective corrosion protection: Ideal for protecting metal surfaces and other materials against moisture and rust.
• Ready to use: No complex preparation or mixing needed, simplifying application.
• Quick application: Thanks to the spray formulation, the product is easily applied and dries quickly.
• Excellent adhesion: Allows good surface preparation before applying the finishing coat.
• Ease of application: Simple use with a conventional gun.
• Fast drying: Can be used for quick repairs with accelerated drying at room temperature or under IR radiation.

Application Method

1. Surface preparation: Ensure the surface is clean, degreased, and free of dust before applying the primer.
2. Application: Shake the spray well for 2 minutes before each use to ensure a homogeneous mix. Apply 3 to 4 light coats, respecting a flash-off time of 5 minutes between each coat at 20°C.
3. Drying: Let dry at room temperature for 1.5 to 2 hours or speed up the process by drying at 60°C for 30 minutes. For fast drying, you can use IR radiation (short waves), with a drying time of 5 minutes at 50% intensity.
4. Sanding: After drying, you can sand the surface with an abrasive P800 before applying the finishing paint.

Safety Instructions

• Professional use only: This product is reserved for professional users.
• Volatile organic compounds (VOC): The VOC content of this product is 695 g/l, compliant with European legislation for category IIB(e) products (limit of 840 g/l).
• Storage: Store the product in a cool, dry place, away from direct light and heat sources.
• Protective equipment: Wear gloves, goggles, and a mask during application to avoid contact with skin and eyes.
• Handling: Do not hit the spray can during shaking. Shake vigorously for 2 minutes before each use.

Compliance and Regulation

• This product complies with legislation 2004/42/IIB(e)(840)695 regarding VOCs, with a VOC content of 695 g/l.
• Please follow car manufacturers' instructions regarding repairs, especially concerning sensor technologies installed on vehicles.

Recommended Application

Primer-sealer A-U-48S is recommended for body repair applications, especially for small surfaces and areas requiring corrosion protection. It is perfect for application on materials such as steel, galvanized steel, aluminum, as well as old paints and parts treated by cataphoresis.

Photo non contractuelle

See all reviews.