Skip to content

+33 (0)1 48 17 05 19
at your service from 8 AM to 6 PM

90A323 - GLASURIT Body Paint Light Red 0.5L

Technical characteristics Glasurit Base Tint – Light Red 90-A323

  • Reference : 90-A323
  • Brand : Glasurit
  • Range : Line 90
  • Type : Water-thinnable base tint to be recoated with clears
  • Color : Light Red
  • Content : 0.5 L
  • Formula : high purity BASF pigments, low VOC content (419 g/L)
  • Application : 2 coats + placement mist
  • Application conditions : HVLP nozzle 1.3 mm, pressure 2–3 bars (inlet), 0.7 bar (atomization)
  • Drying : 5 min at 20 °C between coats, wait for complete matting before clear coating
  • Compatibility : primers, Glasurit clears, prepared metal and plastic substrates

Properties and advantages

  • Excellent covering power with uniform flow
  • Very good resistance to adhesives and mechanical stresses
  • Stable, pure and faithful tint thanks to BASF pigments
  • Low solvent content, compliant with VOC standards
  • Color accuracy guaranteed by the Glasurit database and Color Profi system

Recommended applications

  • Repair work or overall repair on light vehicles
  • Reproduction of manufacturer shades: opaque, metallic, pearlescent
  • Workshop intervention on primed metal or plastic surfaces

Instructions for use

  1. Preparation : clean and sand the surface; filter the paint with a 190 µ cone to remove impurities.
  2. Mixing : 100% tint + 50% 93E3 (or 93E3 SLOW) + binder 90M4 (or 90M4 SLOW depending on temperature).
  3. Application : 2 coats followed by a placement mist, with 5 min drying between each coat at 20 °C.
  4. Drying : wait for complete matting. Dry sanding possible to remove dust before blending.
  5. Finishing : apply a suitable Glasurit clear: 923-610 / 923-625 (glossy) or 923-58 / 923-55 (matte / extra matte).

Tips for optimal clear application

  • Respect the proportions of clears / hardener / thinner according to recommendations
  • Work with products between 18 and 25 °C
  • Perfectly prepare the substrate, clean and dry
  • Adjust the spray gun according to the mixture viscosity
  • Apply in a linear manner, without overloading
  • Carefully clean the equipment after use to avoid contamination

Photo non contractuelle