30662 - 15 trizact Hookit 3M finishing discs on foam - P5000 diameter 150mm

3M 30662 – Trizact™ Hookit™ Foam Disc (P5000)

The 3M 30662 Trizact™ Hookit™ foam disc in P5000 refines 3000 grit sanding scratches to reduce polishing time. Used wet, it minimizes clogging while providing a consistent finish on clears and paints.

• Refinement of P3000 scratches: shorter compounding, less risk of defects.
• Foam + Trizact™ (calibrated mineral structures): consistent and long-lasting cut.
• Wet use: anti-loading without "hydroplaning" overly wet surfaces.
• Hookit™ attachment: quick changes; compatible with Perfect-It™ system.

Technical Specifications

• Series: Trizact™ 443SA – Hookit™ Foam
• Grade: P5000 (super fine)
• Diameter: 150 mm
• Attachment: Hook & Loop (Hookit™)
• Mineral: silicon carbide
• Usage method: wet (damp sanding), orbital/DA
• Packaging: 15 discs / box; 4 boxes / carton
• UPC: 00051131306622

Usage Instructions

1. After Trizact™ 3000 sanding, mount the P5000 disc on a Hookit™ pad (e.g., 05551) with a soft interface (e.g., 05777).
2. Slightly dampen the surface; sand in cross passes with moderate pressure.
3. Wipe, check the surface; then proceed to Perfect-It™ polishing if necessary.

Surfaces and Uses

Refinement of hardened clears/paints, removal of holograms before polishing, high-level blending and finishing in bodywork.

Safety

• Wear PPE (glasses, gloves, respiratory protection); use extraction when possible.
• Do not saturate the surface with water to avoid any loss of effectiveness.

The 3M 30662 Trizact™ P5000 disc speeds up pre-polishing preparation by quickly refining P3000 scratches. Used wet with Hookit™ and a soft interface, it delivers a consistent cut, minimal clogging, and a clean finish ready for polishing.

Photo non contractuelle

See all reviews.