KIT_8007_XTRAFAST - Klarlack SPIES HECKER 8007 5L + 3 Härter extra schnell 3006 1L ENTWURF

The SPIES HECKER Permacron HS 8007 Extra Fast clear coat kit is a complete solution for automotive bodywork clear coating. It includes 1 5-liter container of Permacron HS 8007 clear coat and 3 1-liter containers of Permacron HS 3006 Extra Fast hardener. This high-solid two-component system offers a high-gloss finish, excellent leveling, and good vertical stability. Thanks to its Extra Fast hardener, it is particularly suitable for repairs requiring quick mixing and efficient application.

Technical specifications

• Brand: SPIES HECKER
• Color-Box reference: KIT_8007_XTRAFAST
• Range: Permacron HS
• Type: high-solid 2K clear coat kit
• Composition: 1 5L container of HS 8007 clear coat + 3 1L containers of Extra Fast 3006 hardener
• Total volume: 8 liters of unmixed products
• Clear coat: Permacron HS Clear Coat 8007
• Hardener: Permacron HS 3006 Extra Fast
• Finish: high-gloss
• Mixing ratio by volume: 2:1 (2 parts clear coat to 1 part hardener)
• Pot life with 3006: approximately 30 minutes at 20 °C
• Application: 1 thin, closed coat followed by a normal coat
• Recommended nozzle: 1.3 to 1.4 mm
• Gun pressure: 1.8 to 2.2 bar at the inlet
• HVLP pressure: 0.7 bar at the atomizing cap
• Intermediate flash-off: 0 to 2 minutes
• Final evaporation: 5 to 10 minutes
• Drying at 20 °C: 12 to 16 hours depending on conditions
• Drying at 60–65 °C: 20 to 40 minutes depending on conditions
• Short-wave infrared drying: 5 minutes at half power, then 10 to 15 minutes at full power, according to the manufacturer's recommendations
• VOC compliance: maximum 420 g/L ready to use according to the technical data sheet
• Use: professional automotive bodywork

Advantages

• Complete kit: includes the clear coat and the three hardeners required to prepare it.
• High-gloss finish: ensures a high-quality aesthetic finish on bodywork panels.
• Excellent leveling: promotes a smooth and uniform surface after application.
• Extra Fast hardener: suitable for work requiring high responsiveness in the workshop.
• Simplified application: 2K system with an easy-to-follow 2:1 mixing ratio.
• Good vertical stability: makes application on body panels and elements easier.
• Two-coat application: a first thin coat followed by a normal coat.
• Versatility: suitable for partial repairs and full panels, depending on application conditions.
• Professional packaging: 5 liters of clear coat and 3 liters of hardener for regular workshop use.

Recommended applications

• Clear coating of automotive bodywork panels.
• Partial repairs requiring a high-gloss finish.
• Clear coating of properly prepared fenders, doors, hoods, and bumpers.
• Painting work on full panels.
• Application over compatible Permahyd matte bases after complete evaporation.
• Automotive repairs requiring a two-component HS clear coat system.
• Finishing work in professional bodywork shops.

Application and advice

• Check that the matte base is compatible with Permacron HS 8007 clear coat.
• Allow the base to dry and flash off completely according to its technical data sheet.
• For application over an old finish, carefully sand and degrease the substrate.
• Stir the clear coat before preparing the mixture.
• Mixing ratio: mix 2 parts Permacron HS 8007 clear coat with 1 part Permacron HS 3006 Extra Fast hardener.
• Prepare only the quantity required for application.
• Caution: with the 3006 Extra Fast hardener, the pot life is limited to approximately 30 minutes at 20 °C.
• Use a gun equipped with a 1.3 to 1.4 mm nozzle.
• Set the pressure according to the gun type and the manufacturer's recommendations.
• Apply a first thin, closed coat.
• Allow an intermediate flash-off of 0 to 2 minutes depending on conditions.
• Then apply a normal, even coat to achieve the desired leveling and gloss.
• Allow a final evaporation of 5 to 10 minutes before forced drying.
• Adapt the drying cycle to the temperature and the recommendations of the technical data sheet.
• For complete parameters, consult the official technical data sheet of SPIES HECKER 8007 clear coat.
• Wear personal protective equipment suitable for two-component paint products, especially appropriate respiratory protection.
• Follow safety instructions and work in a properly ventilated booth or area.
• Product strictly reserved for professional use.

Nicht vertragliches Foto

Alle Bewertungen anzeigen.