{"title":"Air network, fittings, blowguns","description":"\u003ch2\u003eAir network, fittings \u0026 blowguns\u003c\/h2\u003e\n\u003cp\u003eThe quality of the air is essential for the durability of your equipment. The \u003cstrong\u003emicrofilter cartridges\u003c\/strong\u003e and \u003cstrong\u003ebronze filters\u003c\/strong\u003e protect your guns and impact wrenches by trapping particles, oil, and moisture. Combined with \u003cstrong\u003eregulators\u003c\/strong\u003e equipped with pressure gauges, they allow you to precisely adjust the pressure, thus avoiding fluctuations that could compromise spray quality or tool performance.\u003c\/p\u003e\n\u003ch2\u003eFittings \u0026 tips\u003c\/h2\u003e\n\u003cp\u003eFor a quick and tight connection, the \u003cstrong\u003eISO fittings\u003c\/strong\u003e (profile 6150B or European) and \u003cstrong\u003econical fittings\u003c\/strong\u003e ensure a solid link between hoses, filters, and tools. The \u003cstrong\u003eear clamp tips\u003c\/strong\u003e guarantee a secure hold on the hoses, while the \u003cstrong\u003etees, elbows, and sleeves\u003c\/strong\u003e facilitate the setup of a modular network adapted to your workshop configuration.\u003c\/p\u003e\n\u003ch2\u003eHoses \u0026 reels\u003c\/h2\u003e\n\u003cp\u003eThe choice of hose is crucial to limit pressure loss and resist wear. Models in \u003cstrong\u003eantistatic rubber\u003c\/strong\u003e or \u003cstrong\u003ePU\/PVC\u003c\/strong\u003e offer flexibility, lightness, and durability. The \u003cstrong\u003eautomatic reels\u003c\/strong\u003e free up floor space and protect the hose from kinks, for daily use without hassle or snags.\u003c\/p\u003e\n\u003ch2\u003eBlowguns \u0026 blowing accessories\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eVenturi nozzle blowguns\u003c\/strong\u003e or metal nozzle blowguns allow the removal of dust and debris from surfaces, paint masks, or trims before intervention. Compact “pen” models are perfect for quick cleaning of corners, while the \u003cstrong\u003emagnetic wall displays\u003c\/strong\u003e keep your blowguns within reach, ready to use.\u003c\/p\u003e\n\u003cp\u003eBy choosing the “Air network, fittings \u0026 blowguns” solutions from \u003cstrong\u003eColorBox\u003c\/strong\u003e, you secure your workshop, increase productivity, and extend the lifespan of your pneumatic tools.\u003c\/p\u003e","products":[{"product_id":"tf-c305-1-cartouche-de-rechange-pour-filtres-ktb-csm3","title":"TF_C305 - 1 replacement cartridge for KTB CSM3 filters","description":"\u003ch2\u003eTechnical features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement cartridge for KTB CSM3 filters.\u003c\/li\u003e\n\u003cli\u003eDimensions compatible with KTB CSM3 filters.\u003c\/li\u003e\n\u003cli\u003eHigh-quality filtering material for effective filtration.\u003c\/li\u003e\n\u003cli\u003eSolid and durable construction for a long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the KTB CSM3 filter is turned off and disconnected from any power source.\u003c\/li\u003e\n\u003cli\u003eCarefully remove the used filter cartridge from the filter following the manufacturer's instructions.\u003c\/li\u003e\n\u003cli\u003eInsert the new Stage 1 filter cartridge into the filter, ensuring it is properly positioned.\u003c\/li\u003e\n\u003cli\u003eCheck that the filter cartridge is securely fixed and engaged in the filter.\u003c\/li\u003e\n\u003cli\u003eReconnect the KTB CSM3 filter and turn it on to resume normal operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and benefits:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective filtration:\u003c\/strong\u003e The Stage 1 filter cartridge is designed to capture particles and impurities present in water or air, ensuring effective filtration and improving flow quality.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental protection:\u003c\/strong\u003e By using replacement filter cartridges, you extend the life of your filter, thereby reducing resource consumption and contributing to environmental preservation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of use:\u003c\/strong\u003e Replacing the filter cartridge is simple and quick, allowing you to maintain optimal filtration without hassle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaintenance and servicing\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePeriodic replacement:\u003c\/strong\u003e Even with regular maintenance, the Stage 1 filter cartridge will eventually lose its filtration efficiency. It is therefore important to replace it periodically according to the manufacturer's recommendations. This will ensure optimal filtration and prevent clogging issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClogging indicator monitoring:\u003c\/strong\u003e Some KTB CSM3 filters are equipped with clogging indicators that warn you when the filter cartridge needs to be replaced. Monitor these indicators and act accordingly to maintain optimal filter performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701902217559,"sku":"TF_C305","price":13.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2534.jpg?v=1750950716"},{"product_id":"81810-cartouche-de-microfiltre-sata-pour-filtres-200-300-et-400","title":"81810 - SATA Microfilter Cartridge for 200, 300, and 400 Filters","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReference: SATA 81810.\u003c\/li\u003e\n\u003cli\u003eDesignation: Fine filter cartridge intended for \u003ca href=\"#\" title=\"filtres\"\u003efilters\u003c\/a\u003e 200, 300, and 400.\u003c\/li\u003e\n\u003cli\u003eFilter: 2 0.1µ 0\/434.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cp\u003eSATA microfilter cartridges offer several advantages for 200, 300, and 400 type filters. Here are some examples:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEffective filtration: These cartridges are designed to provide efficient filtration by trapping small particles, dust, residues, and impurities present in the filtered liquid. They thus help improve the quality of the air breathed by reducing exposure to these potentially dangerous substances.\u003c\/li\u003e\n\u003cli\u003eExtended lifespan: These cartridges are economical and can process a large amount of paint without needing frequent replacement.\u003c\/li\u003e\n\u003cli\u003eEase of maintenance: These cartridges can be easily cleaned with a simple rinse.\u003c\/li\u003e\n\u003cli\u003eEnhanced protection of the user's health against contaminants and the harmful effects of filtered hazardous substances.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips\u003c\/h2\u003e\n\u003cp\u003eIn order to properly filter automotive paint using the \u003ca href=\"#\" title=\"cartouche\"\u003eSATA microfilter\u003c\/a\u003e cartridge, it is recommended to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eChange the 81810 filter every 6 months.\u003c\/li\u003e\n\u003cli\u003eCarefully follow the manufacturer's instructions to properly install the cartridge on the filter.\u003c\/li\u003e\n\u003cli\u003eReplace the cartridge as soon as it reaches its recommended usage limit.\u003c\/li\u003e\n\u003cli\u003eRegularly clean the cartridge to remove accumulated deposits. To do this, you can use a soft, dry cloth to gently wipe the outer surface of the cartridge. Avoid using harsh chemicals that could damage it.\u003c\/li\u003e\n\u003cli\u003eWear full respiratory protective equipment to ensure maximum prevention, especially when working in an environment containing chemical vapors or volatile organic compounds (VOCs).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"SATA","offers":[{"title":"Default Title","offer_id":50701904216407,"sku":"81810","price":245.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/1890.jpg?v=1748595700"},{"product_id":"tf-c301-cartouche-filtrante-pour-micro-filtres-ktb-csm3","title":"TF_C301 - Filter Cartridge for KTB CSM3 Micro Filters","description":"\u003ch2\u003eTechnical Characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFilter Type: Stage 2 coalescing cartridge\u003c\/li\u003e\n\u003cli\u003eFiltration Material: High-quality polyethylene\u003c\/li\u003e\n\u003cli\u003eMaximum Operating Pressure: 16 bars\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -10 to +60°C\u003c\/li\u003e\n\u003cli\u003eAir Flow: Up to 25 m³\/min\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFiltration Efficiency\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolid Particles: Retains particles down to 1 micron\u003c\/li\u003e\n\u003cli\u003eOil Condensates: removes 99.99% of oil condensates\u003c\/li\u003e\n\u003cli\u003eMicroorganisms: Captures and eliminates harmful microorganisms\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEase of Installation and Maintenance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModular Design: Compatible with KTB CSM3 micro-filter systems\u003c\/li\u003e\n\u003cli\u003eQuick Replacement: Bayonet design for fast and tool-free change\u003c\/li\u003e\n\u003cli\u003eReplacement Indicator: Visual indicator for easy maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits for the Professional Bodyworker\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior Paint Quality: Reduces contamination risks, ensuring perfect finishes.\u003c\/li\u003e\n\u003cli\u003eTool Longevity: Extends the lifespan of your paint guns and other equipment.\u003c\/li\u003e\n\u003cli\u003eStandards Compliance: Complies with ISO 8573-1 standards, ensuring high-quality compressed air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDurability and Reliability\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuality Materials: Made from robust materials for long service life.\u003c\/li\u003e\n\u003cli\u003eManufacturer's Warranty: One-year warranty with dedicated customer service.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBody Shops: Ideal for painting, sandblasting, and other applications requiring quality compressed air.\u003c\/li\u003e\n\u003cli\u003eMaintenance and Repair: Also suitable for cleaning and maintenance operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701906215255,"sku":"TF_C301","price":82.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/TF_C301.jpg?v=1767877606"},{"product_id":"br-600is-coffret-de-depannage-boite-raccords-et-embouts-profil-iso-b","title":"BR_600IS - Repair Kit Box with ISO B Profile Fittings and Connectors","description":"\u003ch2\u003eList of items included in the kit :\u003c\/h2\u003e\n\u003ch3\u003eG 1\/4 female fittings - ISI 061101 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for an efficient and secure link.\u003c\/li\u003e\n\u003cli\u003eManufactured according to high quality standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eG 1\/4 female fittings - IRP 061101 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for connections requiring increased robustness.\u003c\/li\u003e\n\u003cli\u003eProvide optimal sealing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eG1\/4 female fittings with sealing cone - IRP066101AE (x1)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for ensuring a hermetic connection.\u003c\/li\u003e\n\u003cli\u003eFacilitates repair and maintenance work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eG 1\/4 male fittings - IRP 066151 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAllow flawless male-female connections.\u003c\/li\u003e\n\u003cli\u003eDurability and resistance guaranteed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEnd fittings for hoses int diam 8mm - IRP066808 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with 8mm hoses.\u003c\/li\u003e\n\u003cli\u003eEnsure a reliable and durable connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eMale threaded G 1\/4 junctions for 8mm diameter tube - JFT 1408 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIdeal for connecting 8mm diameter tubes.\u003c\/li\u003e\n\u003cli\u003eRobust construction for long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eEar clamp hose clips -1315 (x2)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePerfect for ensuring a solid fastening.\u003c\/li\u003e\n\u003cli\u003eEasy to install and remove.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eEar clamp hose clips -1517 (x2)\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFor secure fastening of tubes and hoses.\u003c\/li\u003e\n\u003cli\u003eResistant to corrosion and wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits of the Repair Kit:\u003c\/h2\u003e\n\u003cp\u003eProviding such a variety of tools and parts in a single kit offers many advantages for professionals:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased efficiency: With all necessary elements at hand, downtime spent searching for parts or tools is significantly reduced.\u003c\/li\u003e\n\u003cli\u003eVersatility: Whether you are working on pipes, hoses, or fittings, this kit has everything you need to meet multiple work requirements.\u003c\/li\u003e\n\u003cli\u003eDurability: Each part is manufactured according to high-quality standards, ensuring it will withstand the test of time and intensive use.\u003c\/li\u003e\n\u003cli\u003eOrganization: No more wasted hours searching for the right part or tool. Everything is neatly stored and easily accessible.\u003c\/li\u003e\n\u003cli\u003ePortability: The compact case is easy to carry, whether you are traveling to a client or working in your workshop.\u003c\/li\u003e\n\u003cli\u003eSavings: By investing in a complete kit, you save money compared to buying each part individually.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintenance: To extend the lifespan of each part, it is recommended to clean them after each use. Avoid leaving them in humid or corrosive environments.\u003c\/li\u003e\n\u003cli\u003eSafety: When connecting or disconnecting, ensure the system is depressurized to avoid any risk of injury.\u003c\/li\u003e\n\u003cli\u003eStorage: Although the case is sturdy, it is best to keep it in a cool, dry place to avoid premature deterioration of the components.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701908017495,"sku":"BR_600IS","price":92.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2527.jpg?v=1747681033"},{"product_id":"drf-0812is-enrouleur-tuyau-d-air-comprime-tuyau-pu-pvc","title":"DRF_0812IS - Compressed Air Hose Reel PU\/PVC Hose","description":"\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cp\u003eThe features of the compressed air \u003ca title=\"hose\" href=\"#\"\u003ehose\u003c\/a\u003e reel with PU\/PVC hose, specific to the field of auto body painting, are as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRobust construction:\u003c\/strong\u003e The reel is made with high-quality materials, offering durability and resistance to shocks and wear. It is designed to withstand the harsh conditions of the auto body work environment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePU\/PVC hose:\u003c\/strong\u003e The hose used is made of polyurethane (PU) and polyvinyl chloride (PVC), which gives it great flexibility and increased resistance to chemicals and extreme temperatures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose length:\u003c\/strong\u003e The reel is available with a hose length adapted to the needs of auto body painting, offering sufficient reach to work on different parts of the vehicle without excessive restriction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eReel installation:\u003c\/strong\u003e Attach the compressed air hose reel to a wall or a solid structure using the supplied mounting brackets.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose preparation:\u003c\/strong\u003e Ensure that the PU\/PVC hose is properly connected to the reel and is in good condition, without leaks or damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool connection:\u003c\/strong\u003e connect one end of the PU\/PVC hose to your \u003ca title=\"paint gun\" href=\"#\"\u003epaint gun\u003c\/a\u003e or any other pneumatic tool you wish to use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir pressure regulation:\u003c\/strong\u003e Before starting to use the pneumatic tool, check the air pressure recommended by the tool manufacturer and adjust it accordingly.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTool use:\u003c\/strong\u003e Once the PU\/PVC hose is properly connected, you can use your paint gun or any other pneumatic tool according to the appropriate procedures and techniques.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose rewinding:\u003c\/strong\u003e Once you have finished using the pneumatic tool, release the air pressure and rewind the PU\/PVC hose by gently pulling on it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701909623127,"sku":"DRF_0812IS","price":259.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2522.webp?v=1759925357"},{"product_id":"irp-066101p2-ensemble-2-embouts-filetage-femelle-cylindrique-profil-iso6150b-g1-4","title":"IRP_066101P2 - Set of 2 female threaded cylindrical fittings ISO6150B profile G1\/4","description":"\u003ch2\u003eTechnical characteristics Female threaded cylindrical fitting PREVOST ISO 6150 B G 1\/4″\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct name:\u003c\/strong\u003e Female threaded cylindrical fitting ISO 6150 B G 1\/4″\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Reference:\u003c\/strong\u003e PREVOST – IRP 066101P2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e quick coupling ISO 6150 B profile, female BSPP thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e DN 7.2 mm; thread G 1\/4″ (BSPP); packaging: 2 pcs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal flow rate:\u003c\/strong\u003e 2,000 L\/min at 6 bar (pressure drop ≤ 0.6 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 0 – 12 bar (maximum pressure 16 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e zinc-plated steel body, brass sleeve, stainless steel balls, NBR seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e –15 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial compatibility:\u003c\/strong\u003e fittings and couplers ISO 6150 B profile DN 7.2; steel, aluminum, polyamide networks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication method:\u003c\/strong\u003e direct screwing onto hoses, manifolds or compressed air branches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability \/ resistance:\u003c\/strong\u003e \u0026gt; 100,000 coupling cycles; excellent corrosion and impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification:\u003c\/strong\u003e compliant with ISO 6150 B, factory quality control ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProperties and advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuick connection and positive locking by balls for optimal safety\u003c\/li\u003e\n\u003cli\u003eInstant sealing limiting air loss and preserving network pressure\u003c\/li\u003e\n\u003cli\u003eLow pressure drop to maintain the performance of sanders and spray guns\u003c\/li\u003e\n\u003cli\u003eSteel\/brass construction resistant to corrosion and workshop splashes\u003c\/li\u003e\n\u003cli\u003eStandard ISO profile ensuring interchangeability with European DN 7.2 couplers\u003c\/li\u003e\n\u003cli\u003eReady-to-use female BSPP thread: installation without additional machining\u003c\/li\u003e\n\u003cli\u003ePackaging in 2 units for quick replacement or creation of branches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnection of orbital sanders, grinders, impact wrenches and polishing tools\u003c\/li\u003e\n\u003cli\u003eSupply of HVLP \/ HTE paint guns in preparation areas or booths\u003c\/li\u003e\n\u003cli\u003eExtensions, branches or distribution points on workshop compressed air networks\u003c\/li\u003e\n\u003cli\u003eBlowing, dust removal and technical cleaning operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the male thread G 1\/4″ and apply PTFE tape or appropriate sealing paste.\u003c\/li\u003e\n\u003cli\u003eScrew the PREVOST fitting by hand, then tighten to torque (8 – 10 Nm) using a flat wrench while blocking the body to prevent twisting.\u003c\/li\u003e\n\u003cli\u003ePressurize the line and check for leaks with a foaming solution.\u003c\/li\u003e\n\u003cli\u003eInsert the male ISO 6150 B coupler into the fitting until an audible lock is heard.\u003c\/li\u003e\n\u003cli\u003eFor disconnection, hold the tool and pull back the coupler ring to avoid any whip effect.\u003c\/li\u003e\n\u003cli\u003eRegularly check the condition of the seal and balls; replace worn parts during scheduled maintenance.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701909852503,"sku":"IRP_066101P2","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2545.jpg?v=1747681037"},{"product_id":"erp-076101p2-ensemble-2-embouts-filetage-femelle-cylindrique-profil-europeen-7-2mm-g1-4","title":"ERP_076101P2 - Set of 2 Female Thread Cylindrical Fittings European Profile 7.2mm G1\/4","description":"\u003ch2\u003eTechnical characteristics Female cylindrical threaded fitting PREVOST 7.2 G 1\/4″\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct name :\u003c\/strong\u003e Female cylindrical threaded fitting 7.2 G 1\/4″\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Reference :\u003c\/strong\u003e PREVOST – ERP 076101P2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type :\u003c\/strong\u003e quick coupling European profile, female BSPP thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions :\u003c\/strong\u003e DN 7.2 mm; G 1\/4″ thread (BSPP); packaging: 2 pieces\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal flow rate :\u003c\/strong\u003e 2,300 L\/min at 6 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure range :\u003c\/strong\u003e 0 – 12 bar (max 16 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials :\u003c\/strong\u003e stainless steel body, brass sleeve, stainless steel balls, NBR seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature :\u003c\/strong\u003e –15 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial compatibility :\u003c\/strong\u003e European profile couplers DN 7.2, steel, aluminum or polyamide networks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication method :\u003c\/strong\u003e direct screwing on hoses, manifolds or compressed air branches\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability \/ resistance :\u003c\/strong\u003e \u0026gt; 100,000 coupling cycles, excellent corrosion and impact resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertification :\u003c\/strong\u003e compliant with ISO 6150 B, factory quality control ISO 9001\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProperties and advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure connection thanks to high-retention ball locking\u003c\/li\u003e\n\u003cli\u003eImmediate sealing limiting air loss and maintaining network pressure\u003c\/li\u003e\n\u003cli\u003eLow pressure drop, preserving the performance of sanders, grinders and HVLP\/HTE spray guns\u003c\/li\u003e\n\u003cli\u003eStainless steel \/ brass construction offering high corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStandardized European profile facilitating interchangeability with existing equipment\u003c\/li\u003e\n\u003cli\u003eSimple tightening: ready-to-use female BSPP thread without additional machining\u003c\/li\u003e\n\u003cli\u003ePackaging of 2 for quick replacement or creation of additional branches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnection of orbital sanders, impact wrenches, polishers and other pneumatic tools\u003c\/li\u003e\n\u003cli\u003eSupply of paint spray guns in preparation areas or booths\u003c\/li\u003e\n\u003cli\u003eExtensions and distribution points on workshop compressed air networks\u003c\/li\u003e\n\u003cli\u003eBlowing, dust removal, technical cleaning operations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eClean the male G 1\/4″ thread and apply a PTFE tape or suitable sealing paste.\u003c\/li\u003e\n\u003cli\u003eScrew the PREVOST fitting by hand, then tighten to torque (8 – 10 Nm) with a wrench while holding the body.\u003c\/li\u003e\n\u003cli\u003ePressurize the line and check for leaks using a foaming solution.\u003c\/li\u003e\n\u003cli\u003eInsert the male European profile coupler until an audible lock is heard.\u003c\/li\u003e\n\u003cli\u003eFor disconnection, pull back the coupler ring while holding the tool to avoid whip effect.\u003c\/li\u003e\n\u003cli\u003eRegularly check the seal condition and clean sealing surfaces during periodic maintenance.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701911130455,"sku":"ERP_076101P2","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2557.jpg?v=1750950781"},{"product_id":"erp-076151p2-ensemble-2-embouts-filetage-male-conique-profil-europeen-r1-4","title":"ERP_076151P2 - Set of 2 male threaded conical fittings European profile R1\/4","description":"\u003cp\u003ePerfect for professionals seeking quality components for their technical installations. Note that the photo is non-contractual.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: ERP 076151P2\u003c\/li\u003e\n\u003cli\u003eMale tapered threaded fittings\u003c\/li\u003e\n\u003cli\u003eR1\/4\u003c\/li\u003e\n\u003cli\u003eProfile: European 7.2mm\u003c\/li\u003e\n\u003cli\u003eQuantity: 2\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701914538327,"sku":"ERP_076151P2","price":4.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2558.jpg?v=1750950783"},{"product_id":"irp-066151p2-ensemble-2-embouts-filetage-male-conique-profil-iso6150b-r1-4","title":"IRP_066151P2 - Set of 2 male threaded conical tips ISO6150B profile R1\/4","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: IRP 066151P2\u003c\/li\u003e\n\u003cli\u003eMale tapered threaded fittings\u003c\/li\u003e\n\u003cli\u003eR1\/4\u003c\/li\u003e\n\u003cli\u003eProfile: ISO 6150 B\u003c\/li\u003e\n\u003cli\u003eQuantity: 2\u003c\/li\u003e\n\u003cli\u003enon-contractual photo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701916209495,"sku":"IRP_066151P2","price":8.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2546.jpg?v=1747681042"},{"product_id":"erp-076808p2-ensemble-2-embouts-pour-flexibles-avec-colliers-a-oreilles-profil-europeen-tuyau-int-8mm","title":"ERP_076808P2 - Set of 2 fittings for hoses with ear clamps European profile hose int 8mm","description":"\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEuropean Profile:\u003c\/strong\u003e Designed according to European standards, these fittings are compatible with a wide range of flexible hoses used in the bodywork sector. They ensure a solid and secure connection for applications of all sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8mm Internal Diameter:\u003c\/strong\u003e Suitable for a hose with an 8mm internal diameter, these fittings provide a perfect fit, minimizing the risk of leaks or disconnection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEar Clamps:\u003c\/strong\u003e The included ear clamps offer a safe and effective way to secure the hoses. They are easy to install and can be tightened using a special ear clamp plier, ensuring reliable holding even under high pressure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Made with high-quality materials, these fittings withstand the rigorous demands of bodywork tasks. They can resist high pressures, varying temperatures, and frequent use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Installation:\u003c\/strong\u003e Thanks to their simple and effective design, installing these fittings is a breeze. Just insert them into the hose and tighten the ear clamp for a secure connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e These fittings are compatible with a variety of flexible hoses, making them ideal for numerous applications in the bodywork sector. Whether you are working on a classic restoration or a modern repair, these fittings are the perfect tool for you.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage\u003c\/h2\u003e\n\u003cp\u003eIdeal for use in the bodywork field, this set of 2 fittings is perfect for flexible hoses needed for the maintenance and repair of hydraulic and pneumatic systems in vehicles.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701917782359,"sku":"ERP_076808P2","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2559.jpg?v=1750950785"},{"product_id":"erp-076810p2-ensemble-2-embouts-pour-flexibles-avec-colliers-a-oreilles-profil-europeen-7-4mm-tuyau-int-10mm","title":"ERP_076810P2 - Set of 2 fittings for hoses with ear clamps European profile 7.4mm internal hose 10mm","description":"\u003ch2\u003eTechnical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSet including 2 hose fittings with ear clamps.\u003c\/li\u003e\n\u003cli\u003e7.4mm European profile for compatibility with fittings commonly used in hydraulic and pneumatic systems.\u003c\/li\u003e\n\u003cli\u003e10mm inner pipe for a secure and watertight connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cp\u003eProfessional body shops wishing to use the hose fitting with ear clamps European profile 7 must follow the following steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the hose and pipe are cut cleanly and without burrs.\u003c\/li\u003e\n\u003cli\u003eInsert the inner pipe into the corresponding fitting until it is fully pushed in.\u003c\/li\u003e\n\u003cli\u003ePlace the ear clamp around the fitting and the pipe, making sure it is well positioned.\u003c\/li\u003e\n\u003cli\u003eUse an appropriate plier to tighten the ear clamp until it is firmly fixed, thus ensuring a watertight and secure connection.\u003c\/li\u003e\n\u003cli\u003eVisually check the tightness of the connection and ensure there are no leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cp\u003eThe hose fitting with ear clamps European profile 7 offers several advantages and benefits:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of use:\u003c\/strong\u003e The set of hose fittings with ear clamps allows for simple and quick installation, even for inexperienced users.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtended compatibility:\u003c\/strong\u003e The 7.4mm European profile offers compatibility with fittings commonly used in hydraulic and pneumatic systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure connection:\u003c\/strong\u003e Ear clamps ensure a solid and watertight fastening, guaranteeing a reliable connection between the hose and the pipe.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701919158615,"sku":"ERP_076810P2","price":5.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2560.jpg?v=1750950785"},{"product_id":"irp-066810p2-ensemble-2-embouts-pour-flexibles-avec-colliers-a-oreilles-profil-iso6150b-tuyau-interieur-10mm","title":"IRP_066810P2 - Set of 2 fittings for hoses with ear clamps profile ISO6150B inner hose 10mm","description":"\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuperior Quality:\u003c\/strong\u003e Made with high-quality materials, these fittings ensure superior durability and reliability. Their resistance to corrosion and damage caused by extreme environmental conditions guarantees you flawless service longevity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO6150B Profile:\u003c\/strong\u003e These \u003ca title=\"fittings\" href=\"#\"\u003efittings\u003c\/a\u003e are designed according to the ISO6150B standard, which is internationally recognized for its precision and excellence. This standard ensures optimal compatibility with existing piping systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Installation:\u003c\/strong\u003e Our hose fittings come with ear clamps for quick and easy installation. These clamps provide a secure and stable connection, preventing any potential air or fluid leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect for 10mm Pipes:\u003c\/strong\u003e This set is specifically designed for pipes with a 10mm inner diameter. The precise size and robust design of these fittings guarantee a tight seal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits for Professional Body Shops\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncreased Productivity:\u003c\/strong\u003e The easy and quick installation of these fittings allows body shop professionals to save valuable time, thereby improving their productivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost Reductions:\u003c\/strong\u003e The durability and longevity of these fittings mean fewer replacements and thus long-term savings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable Results:\u003c\/strong\u003e With these fittings, body shop professionals can be assured of achieving professional-quality results every time, minimizing the risk of customer returns.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Safety:\u003c\/strong\u003e The robust design and ISO6150B profile of these fittings ensure optimal safety during use, preventing any risk of breakage or leaks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701920043351,"sku":"IRP_066810P2","price":9.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2548.jpg?v=1750950785"},{"product_id":"irp-066808p2-ensemble-2-embouts-pour-flexibles-avec-colliers-a-oreilles-profil-iso6150b-tuyau-int-8mm","title":"IRP_066808P2 - Set of 2 fittings for hoses with ear clamps profile ISO6150B internal hose 8mm","description":"\u003ch2\u003eTechnical characteristics :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct type: Set of 2 hose fittings with ear clamps\u003c\/li\u003e\n\u003cli\u003eProfile: ISO6150B\u003c\/li\u003e\n\u003cli\u003eInner hose diameter: 8 mm\u003c\/li\u003e\n\u003cli\u003eUse: Suitable for compressed air systems\u003c\/li\u003e\n\u003cli\u003eMaterial: Corrosion-resistant and durable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUse and Application :\u003c\/h2\u003e\n\u003cp\u003eThis set of hose fittings with ear clamps is essential for auto body painting operations.\u003c\/p\u003e\n\u003cp\u003eIt allows easy connection of hoses to compressed air equipment, ensuring optimal air flow during paint application. The ear clamps guarantee a solid and secure attachment, preventing unwanted air leaks.\u003c\/p\u003e\n\u003ch2\u003eAdvantages and Benefits :\u003c\/h2\u003e\n\u003cp\u003eThis set of hose fittings with ear clamps offers several advantages to professional body shops:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO6150B compatibility :\u003c\/strong\u003e Ensures compatibility with standard compressed air systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecure attachment :\u003c\/strong\u003e The ear clamps guarantee a solid and vibration-resistant fixation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal air flow :\u003c\/strong\u003e The 8 mm inner hose allows a steady and sufficient air flow for painting applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrosion resistance :\u003c\/strong\u003e The fittings and clamps are designed to resist corrosion, ensuring long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMake sure to choose the appropriate fittings and clamps according to your specific needs.\u003c\/li\u003e\n\u003cli\u003eBefore installation, check the condition of the hoses and replace them if necessary.\u003c\/li\u003e\n\u003cli\u003eUse ear clamps to securely fasten the fittings to the hoses.\u003c\/li\u003e\n\u003cli\u003eRegularly check connections for any air leaks and make necessary adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701920829783,"sku":"IRP_066808P2","price":9.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2547.jpg?v=1750950787"},{"product_id":"22160-filtre-bronze-sata-424-0-424","title":"22160 - Bronze Filter SATA 424 0\/424","description":"\u003ch2\u003eMain Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBronze Construction:\u003c\/strong\u003e The \u003ca href=\"#\"\u003efilter\u003c\/a\u003e is made of premium bronze, offering superior strength and exceptional durability. This robust construction ensures optimal protection against impurities and guarantees a long filter lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEffective Filtration:\u003c\/strong\u003e The Filter 424 0\/424 is equipped with a highly efficient filtering media, designed to capture fine particles and contaminants present in bodywork liquids. It thus ensures precise and effective filtration, guaranteeing the quality of your work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Retention Capacity:\u003c\/strong\u003e This filter has a high retention capacity, meaning it can trap a large amount of particles without compromising its performance. This helps extend the filter's lifespan and reduce replacement frequency.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Installation:\u003c\/strong\u003e It is designed for easy and quick installation. It is compatible with most existing filtration equipment, allowing you to easily adapt it to your bodywork system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple Maintenance:\u003c\/strong\u003e This product is also easy to maintain. You just need to clean it regularly according to the manufacturer's recommendations to maintain optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved Finish Quality:\u003c\/strong\u003e By eliminating impurities and contaminants present in bodywork liquids, this filter guarantees high-quality finishes without unwanted defects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReduced Maintenance Costs:\u003c\/strong\u003e Thanks to its high retention capacity and exceptional durability, this filter helps reduce costs related to frequent filter replacements. This saves you time and money in the long run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEquipment Protection:\u003c\/strong\u003e By effectively filtering harmful particles, this filter preserves the health and lifespan of your bodywork equipment, thus avoiding costly breakdowns and unnecessary downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed Reliability and Performance:\u003c\/strong\u003e It is manufactured according to the strictest standards, ensuring consistent reliability and performance. You can count on this filter to deliver exceptional results every time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"SATA","offers":[{"title":"Default Title","offer_id":50701921026391,"sku":"22160","price":90.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2013.jpg?v=1747681047"},{"product_id":"ktm-sm2-filtre-regulateur-avec-manometre-et-fixation","title":"KTM_SM2 - Regulator filter with pressure gauge and mounting","description":"\u003cp\u003eDesigned to ensure optimal operation of pneumatic tools, this regulator filter offers a complete solution to control air pressure and filter impurities, thus guaranteeing reliable performance and superior work quality.\u003c\/p\u003e\n\u003ch2\u003ePressure regulation\u003c\/h2\u003e\n\u003cp\u003eThis regulator filter is equipped with an air pressure regulation device. Thanks to this mechanism, professional bodyworkers can easily adjust the air pressure according to the specific needs of each task. A constant and precise air pressure is essential to achieve high-quality results during sanding, polishing, painting, and other bodywork-related tasks.\u003c\/p\u003e\n\u003ch2\u003eImpurity filtration\u003c\/h2\u003e\n\u003cp\u003eThe presence of impurities in compressed air can negatively impact pneumatic tools and the finish of bodywork. This regulator filter features an advanced filtration system that effectively removes particles, condensates, and contaminants from the air. It thus guarantees clean and dry air, preventing blockages, breakdowns, and damage to tools, while preserving the quality of treated surfaces.\u003c\/p\u003e\n\u003ch2\u003ePrecise pressure gauge\u003c\/h2\u003e\n\u003cp\u003eThis regulator filter is also equipped with a high-precision pressure gauge. It allows professional bodyworkers to monitor the air pressure in real time and ensure it remains constant during the work process.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe clear and easy-to-read graduations on the pressure gauge provide precise readings, allowing accurate control of the air pressure at all times.\n\u003ch2\u003eSecure attachment\u003c\/h2\u003e\n\u003cp\u003eThe secure attachment of this regulator filter is of paramount importance to ensure safe use and prevent accidental detachment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701921354071,"sku":"KTM_SM2","price":86.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2531.jpg?v=1750950718"},{"product_id":"ktb-sm2-filtre-regulateur-lubrificateur-2-blocs-avec-manometre-et-fixation","title":"KTB_SM2 - Filter regulator lubricator 2 blocks with pressure gauge and mounting","description":"\u003ch2\u003eProduct Description\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003e2-block design:\u003c\/strong\u003e This lubricating regulator filter is designed in two separate blocks to offer greater flexibility of use. This modular design allows you to easily adapt it to your specific needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-quality filter:\u003c\/strong\u003e It features an efficient filter that removes solid and liquid contaminants from compressed air, thus protecting your pneumatic tools from potential damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise regulator:\u003c\/strong\u003e The integrated regulator allows precise control of the output pressure, ensuring optimal and consistent performance of your tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficient lubricator:\u003c\/strong\u003e The lubricator keeps your tools in good working condition by providing adequate lubrication, thereby reducing wear and extending their lifespan.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntegrated pressure gauge:\u003c\/strong\u003e A precise and easy-to-read pressure gauge is included, allowing you to monitor and adjust the air pressure according to your needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy mounting:\u003c\/strong\u003e The product comes with a robust mounting system, allowing quick and easy installation on your air line.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eProduct Benefits\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability:\u003c\/strong\u003e Designed to withstand the toughest conditions in a body shop, this lubricating regulator filter guarantees a long service life and exceptional reliability.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e With its ability to filter, regulate, and lubricate compressed air, it improves the efficiency and performance of your pneumatic tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e Thanks to its well-thought-out design, maintenance of this product is simple and quick, allowing you to minimize downtime.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost savings:\u003c\/strong\u003e By extending the lifespan of your pneumatic tools and optimizing their operation, the lubricating regulator filter represents a cost-effective investment for your workshop.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnical support:\u003c\/strong\u003e If needed, our technical support team is always ready to assist you and provide the necessary advice.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you are a bodywork professional looking for solutions to optimize the lifespan and efficiency of your pneumatic tools, the 2-block lubricating regulator filter with pressure gauge and mounting is the ideal investment for you.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701921419607,"sku":"KTB_SM2","price":131.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2532.jpg?v=1750950719"},{"product_id":"lub-3256-huile-pneumatique-2l","title":"LUB_3256 - Pneumatic Oil 2L","description":"\u003cp\u003eFormulated to reduce wear and prevent corrosion, it ensures smooth and durable operation of your pneumatic equipment, thus helping to maintain their performance and reliability over time. Ideal for demanding professionals, this oil optimizes maintenance and extends the lifespan of your tools.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"2 Litres","offer_id":51029823881559,"sku":"LUB_3256","price":31.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2536.jpg?v=1747681050"},{"product_id":"bgk-piscm68-kit-rallonge-8m-soufflette-ibg06mtl","title":"BGK_PISCM68 - 8m Extension Kit +IBG06MTL Blow Gun","description":"\u003ch2\u003eTechnical characteristics :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: BGK PISCM68\u003c\/li\u003e\n\u003cli\u003eBrand: PREVOST\u003c\/li\u003e\n\u003cli\u003e. 6150B IBG06MTL\u003c\/li\u003e\n\u003cli\u003ePressure: 8 bar\u003c\/li\u003e\n\u003cli\u003eResistant from -15° to 70°\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701921616215,"sku":"BGK_PISCM68","price":104.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/BGK_PISCM68.jpg?v=1780922522"},{"product_id":"isi-061103cp-profil-iso6150b-g1-2-raccord-filete-femelle-cylindrique","title":"ISI_061103CP - ISO6150B Profile G1\/2 Female Cylindrical Threaded Connector","description":"\u003cp\u003eThis fitting is ideal for applications requiring high performance and increased durability, offering a robust solution for demanding professionals. Note that the photo is non-contractual.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: ISI 061103CP\u003c\/li\u003e\n\u003cli\u003eCylindrical threaded fitting\u003c\/li\u003e\n\u003cli\u003eFemale BSPP thread\u003c\/li\u003e\n\u003cli\u003eG1\/2\u003c\/li\u003e\n\u003cli\u003eProfile: ISO 6150 B\u003c\/li\u003e\n\u003cli\u003eDiam: 6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701921911127,"sku":"ISI_061103CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2539.jpg?v=1750950979"},{"product_id":"isi-061153cp-profil-iso6150b-g1-2-raccord-filete-male-cylindrique","title":"ISI_061153CP - ISO6150B Profile G1\/2 Male Cylindrical Threaded Connector","description":"\u003cp\u003eThis fitting is ideal for applications requiring robustness and precision, offering a durable solution for your threaded connection needs.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRef : ISI 061153CP\u003c\/li\u003e\n\u003cli\u003eCylindrical threaded fitting\u003c\/li\u003e\n\u003cli\u003eMale BSPP thread\u003c\/li\u003e\n\u003cli\u003eG1\/2\u003c\/li\u003e\n\u003cli\u003eProfile: ISO 6150 B\u003c\/li\u003e\n\u003cli\u003eDiam: 6mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701923975511,"sku":"ISI_061153CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2542.jpg?v=1750950980"},{"product_id":"isi-061101cp-profil-iso6150b-g1-4-raccord-filete-femelle-cylindrique","title":"ISI_061101CP - ISO6150B Profile G1\/4 Female Cylindrical Threaded Coupling","description":"\u003cp\u003eThis fitting is ideal for applications requiring high performance and increased durability in demanding industrial environments. Please note that the photo is non-contractual.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef : ISI 061101CP\u003c\/li\u003e\n\u003cli\u003eCylindrical threaded fitting\u003c\/li\u003e\n\u003cli\u003eFemale BSPP thread\u003c\/li\u003e\n\u003cli\u003eG1\/4\u003c\/li\u003e\n\u003cli\u003eProfile: ISO 6150 B\u003c\/li\u003e\n\u003cli\u003eDiam: 6mm\u003c\/li\u003e\n\u003cli\u003enon-contractual photo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701925810519,"sku":"ISI_061101CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2537.jpg?v=1750950982"},{"product_id":"isi-061151cp-profil-iso6150b-g1-4-raccord-filete-male-cylindrique","title":"ISI_061151CP - ISO6150B Profile G1\/4 Male Cylindrical Threaded Connector","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-quality steel construction:\u003c\/strong\u003e This fitting is made from robust corrosion-resistant steel.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eG1\/4 size cylindrical male thread:\u003c\/strong\u003e The fitting is equipped with a G1\/4 size cylindrical male thread, offering compatibility with a wide range of pneumatic components used in body repair operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance with ISO6150B standard:\u003c\/strong\u003e This fitting profile complies with the ISO6150B standard, ensuring optimal interoperability and compatibility with other pneumatic components conforming to this standard.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e Before installing the fitting, ensure that the connection surface is clean and free of any material or debris that could hinder a tight connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnection:\u003c\/strong\u003e Place the fitting on the connection surface and screw it in manually until it is securely fixed. Use an adjustable wrench or a special wrench to firmly tighten the fitting without damaging the thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerification:\u003c\/strong\u003e After securing the fitting, visually check that it is correctly positioned and ensure it is firmly fixed to prevent any air leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e It is recommended to regularly perform a visual inspection of the fitting to detect any signs of wear or damage. If problems are detected, replace the fitting immediately to ensure optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliable connectivity:\u003c\/strong\u003e The cylindrical male threaded fitting ensures a tight and secure connection, guaranteeing leak-free operation of pneumatic systems in body repair operations.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e The ability to visually check the fitting and replace it if necessary simplifies maintenance and helps maintain optimal pneumatic system operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701927973207,"sku":"ISI_061151CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2540.jpg?v=1750950982"},{"product_id":"isi-061102cp-profil-iso6150b-g3-8-raccord-filete-femelle-cylindrique","title":"ISI_061102CP - ISO6150B Profile G3\/8 Female Cylindrical Threaded Connector","description":"\u003ch2\u003eTechnical characteristics :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Stainless steel, ensuring durability and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eDiameter: G3\/8, offering wide compatibility with a multitude of professional equipment.\u003c\/li\u003e\n\u003cli\u003eThread type: Cylindrical, for a solid and reliable fastening.\u003c\/li\u003e\n\u003cli\u003eStandard: ISO6150B, ensuring production quality and standardized compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages for the professional bodyworker :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased safety: Robust design reducing the risk of leaks or failures.\u003c\/li\u003e\n\u003cli\u003eEasy installation: Designed for quick setup, allowing bodyworkers to save valuable time.\u003c\/li\u003e\n\u003cli\u003eUniversal compatibility: Thanks to the ISO6150B standard, this fitting is compatible with a wide range of bodywork equipment.\u003c\/li\u003e\n\u003cli\u003ePerformance optimization: Ensures a tight connection between different elements, thus guaranteeing the proper functioning of the equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon applications :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePainting systems: Ensures a constant and leak-free supply to spray guns.\u003c\/li\u003e\n\u003cli\u003ePneumatic equipment: Offers a reliable connection for tools such as impact wrenches, grinders, etc.\u003c\/li\u003e\n\u003cli\u003eCompressed air systems: Allows a stable and secure supply for various equipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCleaning: To ensure maximum longevity, it is recommended to regularly clean the fitting to remove any residue or dirt.\u003c\/li\u003e\n\u003cli\u003eInspection: Regularly check the fitting for any signs of wear or damage.\u003c\/li\u003e\n\u003cli\u003eLubrication: Light periodic greasing can help ensure smooth operation and extend the fitting's lifespan.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaintenance :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement: If you notice advanced wear or damage, it is recommended to replace the fitting to ensure safety and optimal performance.\u003c\/li\u003e\n\u003cli\u003eStorage: Store in a clean, dry place to prevent corrosion or other damage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701929840983,"sku":"ISI_061102CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2538.jpg?v=1750950983"},{"product_id":"isi-061152cp-profil-iso6150b-g3-8-raccord-filete-male-cylindrique","title":"ISI_061152CP - ISO6150B Profile G3\/8 Male Threaded Cylindrical Connector","description":"\u003ch2\u003eTechnical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThreading :\u003c\/strong\u003e G3\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard :\u003c\/strong\u003e ISO 6150B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial :\u003c\/strong\u003e high-quality steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature :\u003c\/strong\u003e according to manufacturer specifications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability :\u003c\/strong\u003e designed to withstand intensive use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages:\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e Made from high-quality steel, the \u003ca href=\"#\" title=\"raccord fileté mâle cylindrique\"\u003ecylindrical male threaded fitting\u003c\/a\u003e guarantees exceptional strength, capable of withstanding high pressures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLongevity:\u003c\/strong\u003e Its durability is ensured even in the most difficult conditions, guaranteeing an excellent return on investment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO Standard:\u003c\/strong\u003e Compliant with ISO 6150B standard, this fitting ensures universal compatibility, thus facilitating its use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of installation:\u003c\/strong\u003e Its G3\/8 threading allows for quick and effortless installation, enabling bodywork professionals to save valuable time.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThis \u003ca href=\"#\" title=\"raccord fileté mâle cylindrique\"\u003ecylindrical male threaded fitting\u003c\/a\u003e is ideal for a wide range of applications, notably in industrial bodywork, pneumatic system installation, repair and maintenance work. It is also perfect for all applications requiring a secure and reliable connection.\u003c\/p\u003e\n\u003ch2\u003eOur advice\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eRespect the maximum operating pressure :\u003c\/strong\u003e Always ensure that the operating pressure does not exceed the maximum specified in the technical characteristics to avoid damaging the fitting or connected equipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck compatibility :\u003c\/strong\u003e This threaded fitting complies with ISO 6150B standard, which means it should be compatible with most pneumatic equipment. However, it is always important to check compatibility before installation to avoid later issues.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCorrect installation :\u003c\/strong\u003e Make sure to install the fitting correctly. Misaligned or improperly tightened threading can cause leaks or damage the threading.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRegular maintenance :\u003c\/strong\u003e For optimal performance and long service life, regularly maintain the fitting. This includes cleaning the threads and checking for any signs of wear or damage.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSafety\u003c\/h2\u003e\n\u003cp\u003eIt is important to always follow the manufacturer's specifications for installation and use of the ISO6150B G3\/8 Profile Cylindrical Male Threaded Fitting. Proper use not only ensures product longevity but also user safety.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701931839831,"sku":"ISI_061152CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2541.jpg?v=1750950984"},{"product_id":"rpt-et1616-raccord-de-liaison-en-t-diametre-16mm","title":"RPT_ET1616 - T-connector joint diameter 16mm","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: connection fitting\u003c\/li\u003e\n\u003cli\u003eBrand: PREVOST\u003c\/li\u003e\n\u003cli\u003eDiameter: 16mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cp\u003eTo use this tool correctly, it is strongly recommended to follow the steps below:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePipe preparation:\u003c\/strong\u003e Make sure you have pipes compatible with an outer diameter of 16mm. Cut the pipes to the desired length using an appropriate cutting tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eT-fitting preparation:\u003c\/strong\u003e Check that the T-fitting is clean and in good condition. Ensure that the ends of the fitting and the T openings are free of any debris or obstructions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsert the pipes:\u003c\/strong\u003e Insert each end of the pipes into the openings of the T-fitting. Make sure they fit firmly and securely. If necessary, use a lubricant to facilitate insertion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlignment check:\u003c\/strong\u003e Ensure that the pipes are properly aligned in the T-fitting. Visually check and make sure there is no deformation or abnormal angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecuring the pipes:\u003c\/strong\u003e If necessary, use clamps or other appropriate fastening devices to hold the pipes firmly in place where they connect to the T-fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLeak test:\u003c\/strong\u003e Once the pipes are secured, check for leaks at the connections. Open the corresponding water or fluid supply system and carefully observe the connections for any leaks. If a leak is detected, tighten the connections or replace the sealing gaskets if necessary.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701932298583,"sku":"RPT_ET1616","price":7.75,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/3832.jpg?v=1767885520"},{"product_id":"esi-071103cp-raccord-filetage-prevost-femelle-cylindrique-profil-europeen-7-2mm-g1-2","title":"ESI_071103CP - PREVOST female cylindrical thread fitting European profile 7.2mm G1\/2","description":"\u003cp\u003eThanks to its cylindrical female threading and European profile, it ensures a reliable and airtight connection, thus preventing unwanted air leaks.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: female threaded fitting\u003c\/li\u003e\n\u003cli\u003eBrand: PREVOST\u003c\/li\u003e\n\u003cli\u003eFormat: cylindrical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation of the fitting:\u003c\/strong\u003e Make sure the female threaded fitting is clean and in good condition. Check that there is no dirt, debris, or damage that could compromise the seal.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation of the hose:\u003c\/strong\u003e Check that the \u003ca href=\"#\" title=\"hose\"\u003ehose\u003c\/a\u003e or pneumatic tool you want to blend repair to the female threaded fitting is also clean and in good condition. Make sure the ends of the hose or tool are cut cleanly and that there are no leaks or damage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply sealing tape:\u003c\/strong\u003e Carefully wrap quality sealing tape around the male thread of the tool or hose. Make sure to wrap the tape in the direction of the threads to ensure optimal sealing. Be careful not to wrap too much tape, as this could cause connection problems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting the hose:\u003c\/strong\u003e Screw the male threaded end of the hose or tool into the female thread of the \u003ca href=\"#\" title=\"cylindrical fitting\"\u003ecylindrical fitting\u003c\/a\u003e. Turn clockwise to tighten the fitting. Be careful not to overtighten to avoid damaging the threads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChecking the seal:\u003c\/strong\u003e Once the connection is made, check for air leaks. You can perform a test by activating the tool or applying air pressure and observing if there are leaks at the fitting. If leaks are detected, check the fitting tightness and adjust if necessary.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701932527959,"sku":"ESI_071103CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2551.jpg?v=1750950985"},{"product_id":"esi-071101cp-raccord-filetage-prevost-femelle-cylindrique-profil-europeen-7-2mm-g1-4","title":"ESI_071101CP - PREVOST female cylindrical thread fitting European profile 7.2mm G1\/4","description":"\u003ch2\u003eTechnical characteristics Female cylindrical threaded fitting PREVOST 7.2 G1\/4\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct name:\u003c\/strong\u003e Female cylindrical threaded fitting 7.2 G1\/4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand \/ Reference:\u003c\/strong\u003e PREVOST – ESI 071101CP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e quick coupling European profile, female BSPP thread\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e DN 7.2 mm; thread G 1\/4\" (BSPP)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNominal flow rate:\u003c\/strong\u003e 2,300 L\/min at 6 bar\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating pressure:\u003c\/strong\u003e 0 – 12 bar (maximum pressure 16 bar)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterials:\u003c\/strong\u003e zinc-plated steel body, brass sleeve, stainless steel balls, NBR seal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e –15 °C to +70 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial compatibility:\u003c\/strong\u003e European profile male fittings DN 7.2 (ISO 6150 B), steel, aluminum or polyamide networks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication method:\u003c\/strong\u003e direct screwing onto compressed air pipes or manifolds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDurability \/ resistance:\u003c\/strong\u003e \u0026gt; 100,000 coupling cycles, increased resistance to corrosion and shocks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProperties and advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eQuick and secure connection thanks to high retention ball locking\u003c\/li\u003e\n\u003cli\u003eInstant sealing minimizing pressure loss and leaks\u003c\/li\u003e\n\u003cli\u003eLow pressure drop to preserve pneumatic tool efficiency\u003c\/li\u003e\n\u003cli\u003eSteel \/ brass materials ensuring mechanical robustness and corrosion resistance\u003c\/li\u003e\n\u003cli\u003eStandardized European profile facilitating interchangeability with DN 7.2 fittings\u003c\/li\u003e\n\u003cli\u003eReady-to-use female BSPP thread: quick installation without additional machining\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePower supply for orbital sanders, polishers, impact wrenches and pneumatic grinders\u003c\/li\u003e\n\u003cli\u003eConnection of HVLP \/ HTE paint guns in booth or preparation area\u003c\/li\u003e\n\u003cli\u003eExtensions and branches of workshop compressed air networks\u003c\/li\u003e\n\u003cli\u003ePressure checks, blowing and technical cleaning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eCheck the cleanliness of the male thread G 1\/4\" and apply a PTFE tape or suitable sealing paste.\u003c\/li\u003e\n\u003cli\u003eScrew the PREVOST fitting by hand, then tighten to torque (8 – 10 Nm) using a wrench while holding the body to avoid twisting.\u003c\/li\u003e\n\u003cli\u003ePressurize the network and check for leaks with a foaming solution.\u003c\/li\u003e\n\u003cli\u003eInsert the European profile male fitting into the coupling until the audible \"click\" indicating locking.\u003c\/li\u003e\n\u003cli\u003eFor disconnection, push the sliding ring backward while holding the fitting to avoid whip effect.\u003c\/li\u003e\n\u003cli\u003eVisually inspect the seal condition and clean sealing surfaces during periodic maintenance operations.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701933773143,"sku":"ESI_071101CP","price":27.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2549.jpg?v=1750950986"},{"product_id":"esi-071102cp-raccord-filetage-prevost-femelle-cylindrique-profil-europeen-7-2mm-g3-8","title":"ESI_071102CP - PREVOST female cylindrical thread fitting European profile 7.2mm G3\/8","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-quality steel construction for exceptional durability and strength.\u003c\/li\u003e\n\u003cli\u003eEuropean profile 7.2mm cylindrical female threading for extended compatibility with other pneumatic components.\u003c\/li\u003e\n\u003cli\u003eG3\/8 thread size compliant with common industry standards.\u003c\/li\u003e\n\u003cli\u003eResistance to high pressures and harsh environmental conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread verification:\u003c\/strong\u003e Before starting installation, check that the thread of the fitting and the connection surface are compatible and in good condition. If necessary, clean the threads to ensure an optimal connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply sealing tape (optional):\u003c\/strong\u003e If desired, you can apply thread sealing tape on the fitting thread for better sealing. Wrap the tape in the direction of the threads, making sure not to block the fitting openings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitting positioning:\u003c\/strong\u003e Place the fitting on the connection surface aligning the threads. Ensure the fitting is correctly positioned to avoid excessive stress during tightening.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand tightening:\u003c\/strong\u003e Start tightening the fitting by hand clockwise. Turn the fitting firmly to secure it to the connection surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse of a wrench:\u003c\/strong\u003e Use an appropriate wrench to securely tighten the fitting. Be careful not to apply excessive force that could damage the thread.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSealing check:\u003c\/strong\u003e After tightening the fitting, visually check that it is properly fixed and that there is no air or liquid leakage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance and replacement:\u003c\/strong\u003e Regularly perform visual inspections of the fitting to detect any signs of leakage, damage, or wear. Replace the fitting if necessary to ensure a tight and reliable connection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701935706455,"sku":"ESI_071102CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2550.jpg?v=1750950987"},{"product_id":"esi-071153cp-raccord-filetage-prevost-male-cylindrique-profil-europeen-7-2mm-g1-2","title":"ESI_071153CP - PREVOST male cylindrical threaded fitting European profile 7.2mm G1\/2","description":"\u003cp\u003eThis fitting is ideal for professionals seeking a technical solution compliant with current standards, ensuring durability and performance in demanding environments. Please note that the photo is non-contractual.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: ESI 071153CP\u003c\/li\u003e\n\u003cli\u003eCylindrical threaded fitting\u003c\/li\u003e\n\u003cli\u003eMale BSPP thread\u003c\/li\u003e\n\u003cli\u003eG1\/2\u003c\/li\u003e\n\u003cli\u003eProfile: European 7.2mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701937377623,"sku":"ESI_071153CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2554.jpg?v=1750950988"},{"product_id":"esi-071151cp-raccord-filetage-prevost-male-cylindrique-profil-europeen7-2mm-g1-4","title":"ESI_071151CP - PREVOST male cylindrical thread fitting European profile 7.2mm G1\/4","description":"\u003cp\u003eIts robust design and compatibility with various tools make this fitting a must-have for every bodyworker seeking maximum performance.\u003c\/p\u003e\n\u003ch2\u003eMain features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEuropean 7.2mm Profile: Compliance with European standards, thus ensuring compatibility with a wide range of tools and equipment used in bodywork.\u003c\/li\u003e\n\u003cli\u003eHigh-quality material: Made with wear-resistant materials, ensuring a long lifespan even under the toughest conditions.\u003c\/li\u003e\n\u003cli\u003eEasy installation: Designed for simple and quick setup, thus saving time and avoiding complications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages for bodyworkers:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIncreased precision: Thanks to its quality design, this fitting guarantees maximum precision, thus reducing the risk of errors or touch-ups.\u003c\/li\u003e\n\u003cli\u003eExtended compatibility: Can be used with a variety of bodywork tools, offering maximum flexibility.\u003c\/li\u003e\n\u003cli\u003eOptimized performance: Allows for flawless finishes in less time.\u003c\/li\u003e\n\u003cli\u003eErgonomics: Its size and shape have been designed to offer a comfortable grip, thus minimizing fatigue during prolonged work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage recommendations:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintenance: Although made with quality materials, it is recommended to clean the fitting regularly to ensure its durability and effectiveness.\u003c\/li\u003e\n\u003cli\u003eStorage: Store away from dust and moisture to avoid any risk of corrosion.\u003c\/li\u003e\n\u003cli\u003eCompatibility: Before purchase, ensure that your tools comply with the European 7.2mm profile and G1\/4 threading.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701939114327,"sku":"ESI_071151CP","price":27.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2552.jpg?v=1750950989"},{"product_id":"esi-071152cp-raccord-filetage-prevost-male-cylindrique-profil-europeen7-2mm-g3-8","title":"ESI_071152CP - PREVOST male cylindrical fitting European profile 7.2mm G3\/8","description":"\u003cp\u003eIts precise design facilitates assembly and disassembly while minimizing the risk of leaks, making it an ideal choice for demanding industrial applications. Please note that the photo is not contractual.\u003c\/p\u003e\n\u003ch2\u003eTechnical characteristics: \u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef : ESI071152CP\u003c\/li\u003e\n\u003cli\u003eCylindrical threaded fitting\u003c\/li\u003e\n\u003cli\u003eMale BSPP thread\u003c\/li\u003e\n\u003cli\u003eG3\/8\u003c\/li\u003e\n\u003cli\u003eProfile: European 7.2mm\u003c\/li\u003e\n\u003cli\u003enon-contractual photo\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701940818263,"sku":"ESI_071152CP","price":27.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2553.jpg?v=1750950990"},{"product_id":"esi-071810cp-raccord-pour-flexibles-prevost-avec-collier-a-oreilles-profil-7-2mm-tuyau-int-10mm","title":"ESI_071810CP - Connector for PREVOST hoses with ear clamp profile 7.2mm inner hose 10mm","description":"\u003ch2\u003eDesign and manufacturing\u003c\/h2\u003e\n\u003cp\u003eThis component is designed to fit perfectly with hoses of 10mm internal diameter, ensuring a secure and leak-free connection. The fitting features a European profile of 7.2mm, compliant with the most demanding industry standards, thus guaranteeing universal compatibility. It is made of high-quality stainless steel to resist corrosion and ensure a prolonged lifespan, even under the toughest conditions.\u003c\/p\u003e\n\u003ch2\u003eUsage and applications\u003c\/h2\u003e\n\u003cp\u003eThanks to its sophisticated design, this fitting is easy to install, making it ideal for body shop work. Whether replacing a faulty hose or setting up a new installation, it will be your best ally. Moreover, it is suitable for a variety of hoses, making it perfect for a wide range of applications.\u003c\/p\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cp\u003eAs a professional bodywork technician, you will appreciate the efficiency of this fitting. Its corrosion resistance allows it to withstand chemicals often used in body shops, thus ensuring its longevity. Additionally, its ease of installation will save you valuable time and help improve your work productivity.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701942194519,"sku":"ESI_071810CP","price":27.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2556.jpg?v=1750950907"},{"product_id":"esi-071808cp-raccord-pour-flexibles-prevost-avec-collier-a-oreilles-profil-europeen-7-2mm-tuyau-int-8mm","title":"ESI_071808CP - Coupling for PREVOST hoses with ear clamp European profile 7.2mm inner hose 8mm","description":"\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: ESI 071808CP\u003c\/li\u003e\n\u003cli\u003ePrevost ear clamp ref: 1517\u003c\/li\u003e\n\u003cli\u003eProfile: European 7.4mm\u003c\/li\u003e\n\u003cli\u003eInner diameter of the hose: 8mm\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 16 bars\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20°C to +100°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cp\u003eThis hose fitting from \u003ca href=\"#\"\u003ePREVOST\u003c\/a\u003e offers several advantages for bodywork professionals:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility with hoses of 8mm inner diameter, commonly used in the automotive sector.\u003c\/li\u003e\n\u003cli\u003eEase of assembly and disassembly, thanks to its ear clamp which allows easy tightening and loosening of the fitting.\u003c\/li\u003e\n\u003cli\u003eVibration resistance: Hose fittings with ear clamps offer increased resistance to vibrations, making them ideal for industrial applications or environments subject to vibrations.\u003c\/li\u003e\n\u003cli\u003eIncreased safety: The design of the ear clamps ensures the hoses are held securely in place, reducing the risk of leaks and accidents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to use it?\u003c\/h2\u003e\n\u003cp\u003eFollow these steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eCheck that your hose is compatible with this fitting, meaning it has an 8mm inner diameter.\u003c\/li\u003e\n\u003cli\u003eInsert the fitting's end into the hose end.\u003c\/li\u003e\n\u003cli\u003ePlace the ear clamp around the hose and the fitting's end.\u003c\/li\u003e\n\u003cli\u003eUse ear clamp pliers to tighten the clamp, securing the fitting firmly to the hose.\u003c\/li\u003e\n\u003cli\u003eConnect the other end of the fitting to your pneumatic tool, ensuring the connection is airtight.\u003c\/li\u003e\n\u003cli\u003eCheck that the fitting is well secured and that air flows correctly between the hose and the tool.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eTo disassemble the fitting, simply loosen the ear clamp using the pliers, then remove the fitting's end from the hose.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701942751575,"sku":"ESI_071808CP","price":27.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2555.jpg?v=1750950907"},{"product_id":"ral-aisb810-rallonge-de-tuyau-airca-en-caoutchouc","title":"RAL_AISB810 - AIRCA rubber hose extension","description":"\u003ch2\u003eTechnical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRef: RAL AISB810\u003c\/li\u003e\n\u003cli\u003eAIRCA rubber hose extension\u003c\/li\u003e\n\u003cli\u003ewith PREVO S1 quick connector\u003c\/li\u003e\n\u003cli\u003eStrong point: Oil resistance\u003c\/li\u003e\n\u003cli\u003eOperating pressure: 2 to 12 bar\u003c\/li\u003e\n\u003cli\u003eMaterial: SBR\/EPDM\u003c\/li\u003e\n\u003cli\u003eTemperature: -15°C to +70 °C\u003c\/li\u003e\n\u003cli\u003enon-contractual photo\u003c\/li\u003e\n\u003cli\u003eApplications: pneumatic tool supplies\u003c\/li\u003e\n\u003cli\u003eInner\/outer diameter (mm): 8x15\u003c\/li\u003e\n\u003cli\u003eLength (m): 10\u003c\/li\u003e\n\u003cli\u003eProfile: ISO6150B\u003c\/li\u003e\n\u003cli\u003eConnector: ISI06\u003c\/li\u003e\n\u003cli\u003eTip: IRP06\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943046487,"sku":"RAL_AISB810","price":101.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2530.jpg?v=1747681073"},{"product_id":"ral-sisb1012-rallonge-de-tuyau-stolflex-en-caoutchouc-antistatique-profil-iso6150b","title":"RAL_SISB1012 - Antistatic Rubber Hose Extension STOLFLEX ISO6150B Profile","description":"\u003ch2\u003eInstructions for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspection of the hose extension:\u003c\/strong\u003e Before use, visually check the STOLFLEX hose extension to ensure it is in good condition, without cracks or damage. Also check that the hose fittings are securely attached and in good condition.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting the hose extension:\u003c\/strong\u003e Connect one end of the STOLFLEX hose extension to the main hose fitting. Make sure to tighten the fitting well to prevent any leaks.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting the tool:\u003c\/strong\u003e Connect the other end of the STOLFLEX hose extension to the pneumatic tool you wish to use, such as a spray gun or a sandblasting tool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntistatic check:\u003c\/strong\u003e The \u003ca href=\"#\" title=\"STOLFLEX hose extension\"\u003eSTOLFLEX hose extension\u003c\/a\u003e is equipped with an antistatic rubber coating to prevent the buildup of electrostatic charges. Ensure that the surface of the hose extension is clean and free of dust or dirt, which can affect its antistatic effectiveness.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing the tool:\u003c\/strong\u003e Once the hose extension is properly connected, you can use your pneumatic tool according to the appropriate procedures and techniques.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and Benefits\u003c\/h2\u003e\n\u003cp\u003eThe STOLFLEX antistatic rubber hose extension with ISO6150B profile offers several advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexibility and maneuverability:\u003c\/strong\u003e Thanks to its flexible rubber design, the STOLFLEX hose extension allows great freedom of movement, making it easier to access hard-to-reach areas during bodywork.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntistatic:\u003c\/strong\u003e The hose extension features an antistatic rubber coating that prevents the buildup of electrostatic charges. This helps reduce the risks of sparks, electrocution, and potential damage to sensitive components when using pneumatic tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFeel free to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943341399,"sku":"RAL_SISB1012","price":114.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2528.jpg?v=1747681074"},{"product_id":"ral-sesb1012-rallonge-de-tuyau-stolflex-en-caoutchouc-antistatique-profil-europeen","title":"RAL_SESB1012 - STOLFLEX antistatic rubber hose extension European profile","description":"\u003ch2\u003eTechnical specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: High-end antistatic rubber\u003c\/li\u003e\n\u003cli\u003eLength: Available in several sizes to suit all your needs\u003c\/li\u003e\n\u003cli\u003eProfile: Compliance with European standards ensuring flawless compatibility.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMain advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSuperior durability: Made from premium antistatic rubber, this extension is designed to last and withstand workshop rigors.\u003c\/li\u003e\n\u003cli\u003eIncreased safety: The hose's antistatic nature prevents spark risks, thus ensuring maximum safety during work.\u003c\/li\u003e\n\u003cli\u003eFlexibility: Despite its robustness, the STOLFLEX hose offers great flexibility, facilitating its use in confined or hard-to-reach spaces.\u003c\/li\u003e\n\u003cli\u003eEuropean connectivity: With its European profile, ensure perfect connectivity with all your tools and equipment compliant with EU standards.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCommon applications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePainting work: Reduce contamination risks thanks to the absence of static discharges.\u003c\/li\u003e\n\u003cli\u003ePressure cleaning: The hose's strength allows worry-free use with high-pressure cleaners.\u003c\/li\u003e\n\u003cli\u003eCompressed air: Perfect for connecting your pneumatic tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaintenance: To ensure maximum longevity, it is recommended to regularly check the hose's integrity and clean it after each use.\u003c\/li\u003e\n\u003cli\u003eStorage: Store your STOLFLEX hose extension away from UV rays, extreme temperatures, and away from aggressive chemicals.\u003c\/li\u003e\n\u003cli\u003eInstallation: Make sure to properly blending repair the hose to your equipment, avoiding any twisting or excessive bending.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943439703,"sku":"RAL_SESB1012","price":131.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2529.jpg?v=1747681075"},{"product_id":"27102-mtl-soufflette-27102-prevost-a-buse-metallique-filetage-1-4-femelle","title":"27102_MTL - Blow Gun 27102 PREVOST with Metal Nozzle 1\/4 Female Thread","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlow gun with metal nozzle for increased durability and reliable performance.\u003c\/li\u003e\n\u003cli\u003e1\/4 inch female thread for compatibility with a wide range of fittings and pneumatic tools.\u003c\/li\u003e\n\u003cli\u003eRobust construction to withstand demanding working conditions. Maximum recommended operating pressure for safe and efficient use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eMake sure the pneumatic tool you want to connect the blow gun to is turned off and disconnected from any compressed air source.\u003c\/li\u003e\n\u003cli\u003eInsert the metal nozzle of the blow gun into the female thread of the tool or pneumatic fitting, ensuring it is properly aligned.\u003c\/li\u003e\n\u003cli\u003eTighten the blow gun by turning clockwise until it is firmly attached to the tool or fitting.\u003c\/li\u003e\n\u003cli\u003eVisually check that the connection is secure and that there are no air leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePowerful air jet:\u003c\/strong\u003e The 27102 blow gun with its metal nozzle generates a powerful air jet to easily remove dust, debris, and residues from surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide compatibility:\u003c\/strong\u003e The 1\/4 inch female thread offers compatibility with a wide range of fittings and pneumatic tools, providing flexibility in applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrecise control:\u003c\/strong\u003e The blow gun allows precise control of the air flow, facilitating cleaning and drying tasks in hard-to-reach areas.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of use:\u003c\/strong\u003e The 27102 blow gun is easy to install and use, offering comfortable handling and reliable performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943603543,"sku":"27102_MTL","price":17.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2520.jpg?v=1750863983"},{"product_id":"27102-osh-soufflette-27102-prevost-a-buse-osha-avec-effet-venturi","title":"27102_OSH - Blow Gun 27102 PREVOST with OSHA Nozzle and VENTURI Effect","description":"\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e Made with high-quality materials, offering durability and wear resistance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSHA Nozzle:\u003c\/strong\u003e Compliant with OSHA safety standards regarding compressed air exposure.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVenturi Effect:\u003c\/strong\u003e Increases the speed and pressure of compressed air for effective cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafety:\u003c\/strong\u003e Reduces risks of exposure to compressed air thanks to the OSHA nozzle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for Use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePreparation:\u003c\/strong\u003e check that the blowgun is properly connected to a compressed air source and that the pressure is appropriate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e point the nozzle towards the surface to be cleaned and press the trigger to release the compressed air jet. Move the blowgun evenly to cover the entire desired area.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning:\u003c\/strong\u003e after use, turn off the compressed air source and carefully clean the blowgun to remove residues and debris.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaintenance:\u003c\/strong\u003e regularly check the condition of the nozzle and replace it if necessary. Also perform periodic maintenance checks to ensure optimal operation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and Benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCleaning Power:\u003c\/strong\u003e The venturi effect provides a powerful compressed air jet, ensuring effective surface cleaning.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompliance with Safety Standards:\u003c\/strong\u003e The OSHA nozzle guarantees use in accordance with safety standards, reducing risks of exposure to compressed air.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of Use:\u003c\/strong\u003e Lightweight and ergonomic, the blowgun offers a comfortable grip and easy handling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy Maintenance:\u003c\/strong\u003e Regular maintenance of the blowgun helps maintain its proper functioning and optimal performance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943832919,"sku":"27102_OSH","price":17.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2521.jpg?v=1750863984"},{"product_id":"ibg06-osh-soufflette-prevost-s1-a-buse-composite-osha-profil-iso-6150b","title":"IBG06_OSH - PREVOST S1 Blow Gun with Composite Nozzle OSHA ISO 6150B Profile","description":"\u003ch2\u003eRobust design and superior performance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-quality composite material:\u003c\/strong\u003e The composite material used for the nozzle ensures exceptional durability and superior resistance to the toughest conditions in body shops.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO 6150B profile:\u003c\/strong\u003e Compliance with the international standard ISO 6150B, ensuring universal compatibility and ease of use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal air flow:\u003c\/strong\u003e This \u003ca href=\"#\" title=\"blowgun\"\u003eblowgun\u003c\/a\u003e offers a powerful and constant air flow for maximum performance in all cleaning and drying applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSafety and compliance\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOSHA compliant:\u003c\/strong\u003e The \u003ca href=\"#\" title=\"blowgun\"\u003eblowgun\u003c\/a\u003e meets the Occupational Safety and Health Administration (OSHA) regulations to ensure user safety.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverpressure protection:\u003c\/strong\u003e The smart design of the PREVO S1 blowgun protects the user against accidental overpressure, thus preventing potential injuries.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulated nozzle:\u003c\/strong\u003e The insulating composite nozzle minimizes the risk of thermal shocks during handling, offering safer use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eErgonomics and ease of use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLightweight:\u003c\/strong\u003e It is lightweight to reduce user fatigue during prolonged use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent maneuverability:\u003c\/strong\u003e Its ergonomic shape allows for an excellent grip for precise control and comfortable use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy maintenance:\u003c\/strong\u003e Designed for minimal maintenance and easy replacement of parts if needed.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701943898455,"sku":"IBG06_OSH","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2526.jpg?v=1780922027"},{"product_id":"ibg06-mtl-soufflette-prevost-s1-a-buse-metallique-profil-iso-6150b","title":"IBG06_MTL - PREVOST S1 Blow Gun with Metal Nozzle ISO 6150B Profile","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReference: IBG06 MTL.\u003c\/li\u003e\n\u003cli\u003eProfile: ISO 6150B.\u003c\/li\u003e\n\u003cli\u003eColor: blue and black.\u003c\/li\u003e\n\u003cli\u003eAir consumption: 20 Nm 3\/h.\u003c\/li\u003e\n\u003cli\u003eNoise level: 89 dBA.\u003c\/li\u003e\n\u003cli\u003eBlowing force: 390 g.\u003c\/li\u003e\n\u003cli\u003eDynamic pressure at 10 mm: 2.2 bar.\u003c\/li\u003e\n\u003cli\u003eNozzle type: zinc-plated steel metal.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cp\u003eThe Prevo S1 blowgun with metal nozzle ISO 6150B profile offers several important advantages. Here are some of them:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDurability: The metal nozzle of the Prevo S1 blowgun is made of sturdy metal, which gives it great durability. It can withstand harsh working conditions and intensive use.\u003c\/li\u003e\n\u003cli\u003eConcentrated air jet that ensures increased precision during cleaning, dust removal, or blowing. As a result, you can easily reach difficult areas and clear them of unwanted particles.\u003c\/li\u003e\n\u003cli\u003eErgonomic design with a practical tapered nozzle optimizing the user's work.\u003c\/li\u003e\n\u003cli\u003eEasy storage to avoid clutter in the workplace.\u003c\/li\u003e\n\u003cli\u003eSafety: The Prevo S1 blowgun is equipped with an integrated tip that limits the air output pressure and prevents any risk of leakage during operation.\u003c\/li\u003e\n\u003cli\u003eEasy attachment thanks to the dedicated support.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe Prevo S1 blowgun with metal nozzle can be used in various applications, such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCleaning surfaces by blowing compressed air with precision. The metal nozzle ISO 6150B profile provides a concentrated and powerful air jet, ideal for removing dust, chips, or debris from different surfaces.\u003c\/li\u003e\n\u003cli\u003eDust removal from parts or work areas. The Prevo S1 blowgun with its metal nozzle allows dislodging dust particles from hard-to-reach places.\u003c\/li\u003e\n\u003cli\u003eBlowing: The tool can also be used to blow compressed air in specific applications, such as drying parts or surfaces, clearing fluids, etc.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701944160599,"sku":"IBG06_MTL","price":18.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2525.jpg?v=1780921968"},{"product_id":"wje05-souffleur-d-air-wind-jet-sans-raccord","title":"WJE05 - Wind Jet Air Blower without Fitting","description":"\u003ch2\u003eTechnical characteristics Finixa Windjet WJE05 air blower\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eReference: WJE05\u003c\/li\u003e\n\u003cli\u003eBrand: Finixa\u003c\/li\u003e\n\u003cli\u003eProduct type: Air blower without fitting\u003c\/li\u003e\n\u003cli\u003eMaterial: Durable ABS synthetic body\u003c\/li\u003e\n\u003cli\u003eUsage mode: Manual use or fixed position\u003c\/li\u003e\n\u003cli\u003eConnection: For blending repair to standard compressed air hose\u003c\/li\u003e\n\u003cli\u003eJet type: Flat, high flow compressed air stream\u003c\/li\u003e\n\u003cli\u003eApplications: Cooling, blowing, drying\u003c\/li\u003e\n\u003cli\u003eParticularly suitable for drying waterborne clear coats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProperties and advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlat compressed air jet with high flow power\u003c\/li\u003e\n\u003cli\u003eLightweight, robust and durable ABS body\u003c\/li\u003e\n\u003cli\u003eUsable by hand or fixed in place\u003c\/li\u003e\n\u003cli\u003eIdeal to speed up drying of waterborne clear coats\u003c\/li\u003e\n\u003cli\u003eFacilitates spot-repair in bodywork\u003c\/li\u003e\n\u003cli\u003eQuick connection to compressed air network\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRecommended applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFast drying of waterborne paints\u003c\/li\u003e\n\u003cli\u003eLocalized repairs and touch-ups (spot-repair)\u003c\/li\u003e\n\u003cli\u003eBlowing dust or debris in surface preparation\u003c\/li\u003e\n\u003cli\u003eSpot cooling in body shop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBlending repair the blower to the compressed air hose\u003c\/li\u003e\n\u003cli\u003eUse manually or fix in position as needed\u003c\/li\u003e\n\u003cli\u003eDirect the flat air jet onto the area to dry or clean\u003c\/li\u003e\n\u003cli\u003eCheck the air flow suitable for the type of substrate and application\u003c\/li\u003e\n\u003cli\u003eFollow safety instructions related to compressed air use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FINIXA","offers":[{"title":"Default Title","offer_id":50701944258903,"sku":"WJE05","price":31.25,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/WJE05-Souffleurd_airWindjetsansraccord.jpg?v=1769519450"},{"product_id":"ktb-csm3-ensemble-micro-filtre-avec-regulateur-et-manometre","title":"KTB_CSM3 - Micro filter set with regulator and pressure gauge","description":"\u003ch2\u003eTechnical Specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMicro Filter:\n\u003cul\u003e\n\u003cli\u003ePrecision filtration to remove contaminants down to 0.01 micron.\u003c\/li\u003e\n\u003cli\u003eStainless steel design for maximum durability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRegulator:\n\u003cul\u003e\n\u003cli\u003eRegulation range: 0-10 bar.\u003c\/li\u003e\n\u003cli\u003eExceptional sensitivity for precise regulation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePressure gauge:\n\u003cul\u003e\n\u003cli\u003eMeasurement range: 0-12 bar.\u003c\/li\u003e\n\u003cli\u003eClear and precise reading, with shock protection.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotable Advantages:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnhanced performance: Ensures a clean and constant air supply for optimal paint application.\u003c\/li\u003e\n\u003cli\u003eAdaptability: Compatible with a wide range of professional painting equipment.\u003c\/li\u003e\n\u003cli\u003eDurability: Made with high-quality materials to withstand daily workshop wear.\u003c\/li\u003e\n\u003cli\u003eEasy installation: Ergonomic design that facilitates integration into any workspace.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhy choose SPECIAL PEINTURE for professional body shops?\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFlawless finish: The elimination of contaminants guarantees a smooth and defect-free finish.\u003c\/li\u003e\n\u003cli\u003eTime optimization: Fewer touch-ups needed thanks to more precise application.\u003c\/li\u003e\n\u003cli\u003eSavings: Less paint waste and reduced costs in the long term.\u003c\/li\u003e\n\u003cli\u003eSafety: Ensures stable regulation, thus minimizing the risks of errors or accidents.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOur Tips:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUsage optimization: To ensure the best performance, make sure the micro filter assembly is installed as close as possible to your point of use.\u003c\/li\u003e\n\u003cli\u003eRegular maintenance: Although our product is designed to withstand wear, regular maintenance is essential. Check the filter every week and replace it as soon as it shows signs of wear or excessive contamination.\u003c\/li\u003e\n\u003cli\u003ePressure gauge monitoring: Always keep an eye on the pressure gauge readings. An unexpected fluctuation may indicate a problem that requires your attention.\u003c\/li\u003e\n\u003cli\u003eWork environment: Make sure your workspace is clean and well-ventilated. A clean environment greatly contributes to the longevity of the equipment and the quality of the finished work.\u003c\/li\u003e\n\u003cli\u003eAccessory compatibility: Always use compatible and recommended accessories to ensure optimal performance and avoid any risk of damage or malfunction.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701944455511,"sku":"KTB_CSM3","price":249.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2533.jpg?v=1750950720"},{"product_id":"bg-fixm-support-de-fixation-mural-magnetique-prevost-pour-soufflettes-prevos1-et-27102","title":"BG_FIXM - Magnetic Wall Mount Bracket PREVOST for prevoS1 Blow Guns and 27102","description":"\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cp\u003eThe magnetic wall mount for prevoS1 and 27102 blowguns is designed to allow you to fix these blowguns on a metal surface, such as a wall or shelf, in a practical and secure way. Here is how to use it:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePrepare a suitable metal surface.\u003c\/li\u003e\n\u003cli\u003ePlace the wall mount against the chosen metal surface, ensuring it is well positioned.\u003c\/li\u003e\n\u003cli\u003eTake the blowgun and place it on the mount. Make sure it is properly aligned and securely resting on the mount.\u003c\/li\u003e\n\u003cli\u003eCheck that the blowgun is properly fixed to the magnetic wall mount by shaking it slightly or applying light pressure.\u003c\/li\u003e\n\u003cli\u003eUse the blowgun, leaving the magnetic wall mount to hold it in place.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cp\u003eThe magnetic wall mount for prevoS1 and 27102 blowguns offers several advantages:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy to install:\u003c\/strong\u003e it is easy to install and does not require additional tools. Just fix it on a suitable metal surface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSave space:\u003c\/strong\u003e by fixing the blowgun on the wall mount, you gain space on your workbench in your workshop. It is an excellent tool to ensure more efficient storage and to avoid clutter.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSave time:\u003c\/strong\u003e with the blowgun fixed to the wall, it is always within reach when you need it. You save time by avoiding searching for the blowgun or having to move it from one place to another.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701944553815,"sku":"BG_FIXM","price":33.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/BG_FIXM.jpg?v=1781512572"},{"product_id":"bg-fix-support-de-fixation-mural-prevost-pour-soufflettes-prevo-s1-et-27102","title":"BG_FIX - Wall Mounting Bracket PREVOST for Blow Guns prevo S1 and 27102","description":"\u003ch2\u003eOrganized workspace\u003c\/h2\u003e\n\u003cp\u003eThis bracket allows you to store and organize the air blower conveniently. By fixing it to the wall, you save space on your workbench and keep your tool within reach, making it easier to use and avoiding clutter.\u003c\/p\u003e\n\u003ch2\u003eAccessible air blower\u003c\/h2\u003e\n\u003cp\u003eThanks to this bracket, your air blower is always accessible. You no longer need to search for the tool or move it from one place to another. Just take it from the wall bracket when you need it, saving you time and effort.\u003c\/p\u003e\n\u003ch2\u003eSecure attachment\u003c\/h2\u003e\n\u003cp\u003eThe wall mounting bracket ensures a secure hold for the air blower. You can be sure it will stay in place and not fall during use or storage.\u003c\/p\u003e\n\u003cp\u003eThis reduces the risk of damage or breakage, thereby extending the lifespan of your tool.\u003c\/p\u003e\n\u003ch2\u003eEasy installation\u003c\/h2\u003e\n\u003cp\u003eInstalling the wall mounting bracket is very easy and requires no additional tools. You just need to position it against the appropriate wall surface, and its magnetic force ensures a solid and stable attachment.\u003c\/p\u003e\n\u003ch2\u003eLong Lifespan\u003c\/h2\u003e\n\u003cp\u003eMade with quality materials, this bracket is durable and resistant to regular use. It is designed to support the weight of the air blower and withstand daily stresses.\u003c\/p\u003e\n\u003ch2\u003eVisually pleasing\u003c\/h2\u003e\n\u003cp\u003eBesides its practical advantages, the wall mounting bracket also adds an aesthetic touch to your work environment. It gives an impression of order and professionalism by keeping tools organized and neat.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701944619351,"sku":"BG_FIX","price":6.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2524.jpg?v=1750863986"},{"product_id":"05174-tuyau-d-aspiration-3m-de-6m-pour-cale-aspirante","title":"05174 - 3M suction hose 6m for vacuum sanding block","description":"\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eHose preparation: Check that the suction hose is in good condition, without kinks or damage. Make sure it is clean and free of any debris that could obstruct airflow.\u003c\/li\u003e\n\u003cli\u003eMounting the suction block: Attach the \u003ca href=\"#\" title=\"cale aspirante\"\u003esuction block\u003c\/a\u003e to the work surface using the appropriate method.\u003c\/li\u003e\n\u003cli\u003eHose connection: Plug one end of the suction hose into the suction outlet of the suction block. Ensure the connection is tight to avoid air leaks.\u003c\/li\u003e\n\u003cli\u003eConnection to spraying equipment: Connect the other end of the suction hose to the spraying equipment, such as a \u003ca href=\"#\" title=\"pistolet\"\u003espray gun\u003c\/a\u003e or a painting system. Make sure the connection is secure to prevent leaks.\u003c\/li\u003e\n\u003cli\u003eChecking suction flow: Before starting the spraying process, ensure that the suction hose is properly connected and that the airflow is sufficient to capture particles. Also check for any air leaks along the hose or fittings.\u003c\/li\u003e\n\u003cli\u003eUse during spraying: When applying paint, keep the suction hose close to the spraying area to capture airborne particles. Move it slowly and steadily to cover the entire work surface.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eCare and maintenance\u003c\/h2\u003e\n\u003cp\u003eAfter use, carefully clean the suction hose to remove any buildup of paint or dust. Regularly check the condition of the hose and replace it if any damage is found.\u003c\/p\u003e\n\u003cp\u003eIt is important to refer to the specific instructions provided by the manufacturer of the 6m suction hose for suction block, as well as the safety guidelines when using spraying equipment in the field of auto body painting.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"3M","offers":[{"title":"Default Title","offer_id":50701946585431,"sku":"05174","price":47.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/05174.jpg?v=1767864345"},{"product_id":"isi-061810cp-tuyau-profil-iso6150b-raccord-pour-flexible-collier-a-oreilles-interieur-10mm","title":"ISI_061810CP - ISO6150B Profile Hose Connector for 10mm Inner Diameter Ear Clamp Flexible Hose","description":"\u003ch2\u003eTechnical specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal diameter:\u003c\/strong\u003e The hose has an internal diameter of 10mm, allowing optimal air flow while maintaining ideal robustness for intensive use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eISO6150B compliance:\u003c\/strong\u003e This hose complies with the ISO6150B standard, which guarantees a universally accepted fitting profile and perfect interoperability with your existing pneumatic tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHose fitting:\u003c\/strong\u003e It is equipped with a \u003ca href=\"#\" title=\"hose fitting\"\u003ehose fitting\u003c\/a\u003e, allowing easy and hassle-free installation. It is designed to withstand high pressure while ensuring a solid and secure connection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEar clamp:\u003c\/strong\u003e The included ear clamp is an effective way to securely fasten the hose to your equipment. Its unique design offers excellent resistance to pulling and twisting, thus ensuring increased durability and peace of mind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReliability:\u003c\/strong\u003e Made with high-quality materials, this hose guarantees exceptional durability and resistance to the most demanding working conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility:\u003c\/strong\u003e Thanks to its ISO6150B profile, this hose is compatible with a wide range of pneumatic tools, allowing you to use it in various bodywork applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy installation:\u003c\/strong\u003e With its hose fitting and ear clamp, installation is easy. You will save time by avoiding unnecessary hassles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eApplications\u003c\/h2\u003e\n\u003cp\u003eThe INT Hose is an essential equipment for bodywork professionals. It is ideal for a variety of applications, such as spray painting, polishing, sanding, tire inflation, and many others. Whatever the task, you can rely on our hose to deliver consistent and reliable performance.\u003c\/p\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701948518743,"sku":"ISI_061810CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2544.jpg?v=1750950909"},{"product_id":"isi-061808cp-tuyau-profil-iso6150b-raccord-pou-flexible-collier-a-oreilles-interieur-8mm","title":"ISI_061808CP - ISO6150B Profile Hose Connector for Ear Clamp Flexible Inner 8mm","description":"\u003ch2\u003eTechnical characteristics\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e8mm inner hose with ISO6150B profile for wide compatibility with hoses and fittings.\u003c\/li\u003e\n\u003cli\u003eSolid construction with quality materials for exceptional durability and resistance. Male threading for easy and secure connection with ear clamps.\u003c\/li\u003e\n\u003cli\u003eCompliant with ISO6150B standards for guaranteed quality and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003eCut the hose to the desired length using a suitable cutting tool.\u003c\/li\u003e\n\u003cli\u003eCarefully insert the end of the hose into the fitting, ensuring it is properly in place.\u003c\/li\u003e\n\u003cli\u003eFirmly tighten the ear clamp around the fitting and hose using an appropriate plier.\u003c\/li\u003e\n\u003cli\u003eVisually check the tightness of the connection and ensure there are no leaks.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eAdvantages and benefits\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide compatibility:\u003c\/strong\u003e The ISO6150B profile and 8mm inner diameter offer compatibility with a variety of hoses and fittings, providing flexibility in applications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength and durability:\u003c\/strong\u003e Made with quality materials, this inner hose is wear-resistant and guarantees long-lasting performance under demanding working conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEase of installation:\u003c\/strong\u003e The design of the fitting with ear clamp allows for easy and secure installation, without the need for special tools.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuaranteed reliability:\u003c\/strong\u003e Compliant with ISO6150B standards, this inner hose offers guaranteed quality and reliability, ensuring confident use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us for more information.\u003c\/p\u003e","brand":"PREVOST","offers":[{"title":"Default Title","offer_id":50701950058839,"sku":"ISI_061808CP","price":28.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2543.jpg?v=1750950910"},{"product_id":"70-49-aerosol-soudure-cuivre-revetement-metallique-400ml","title":"70-49 - Copper Welding Aerosol Metal Coating 400ml","description":"\u003ch2\u003eMain Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePractical storage:\u003c\/strong\u003e The 400 ml size of the spray makes it easy to store in body shops. It takes up less space and can be stored more conveniently than several small sprays.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsage flexibility:\u003c\/strong\u003e With 400 ml available, body shop professionals have the flexibility to use the product for different applications. Whether for small touch-ups or larger repairs, the amount of product available meets a variety of needs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCost reduction:\u003c\/strong\u003e The large size of the spray helps reduce costs by avoiding the need to purchase smaller quantities of metallic coating more frequently. This can represent significant savings in the long term for body shops.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstructions for use\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eShake the spray:\u003c\/strong\u003e Before use, shake the spray vigorously for a few moments to thoroughly mix the components and achieve an even spray.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoating application:\u003c\/strong\u003e Hold the spray about 20 to 30 centimeters from the surface to be treated. Spray the product using regular sweeping motions, ensuring to cover the surface evenly. Apply a thin layer and avoid overloading which could cause drips.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrying time:\u003c\/strong\u003e Allow the metallic coating to dry for the period recommended by the manufacturer. Be sure to respect the indicated drying time to achieve the best results. Avoid touching or handling the surface during drying to prevent any alteration of the coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"METAFLUX","offers":[{"title":"Default Title","offer_id":50702254899543,"sku":"70-49","price":17.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/3090.jpg?v=1747666748"},{"product_id":"gps9118-soufflette-stylo-pour-retirer-la-poussiere-diametre-8mm","title":"GPS9118 - Pen Blow Gun for Dust Removal Diameter 8mm","description":"\u003ch2\u003eAdjustable jet pen blower\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRéférence : \u003c\/strong\u003e GPS9118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eDiameter: \u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e 8mm\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong style=\"font-size: 0.875rem;\"\u003eMarque : \u003c\/strong\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e ENOV'CAR\u003c\/span\u003eDescription\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e The air flow is adjustable by rotating the pen body, offering great flexibility of use.\u003c\/p\u003e\n\u003ch2\u003eThe advantages\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompact, lightweight, sturdy, and easy to handle\u003c\/li\u003e\n\u003cli\u003eAllows reaching narrow and hard-to-access places\u003c\/li\u003e\n\u003cli\u003eDoes not leave marks or scratches on surfaces\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ENOV'CAR","offers":[{"title":"Default Title","offer_id":50702287634775,"sku":"GPS9118","price":12.9,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/8f87de2a384e1f219e264e39595b.jpg?v=1747605074"},{"product_id":"052642-pince-de-tirage-gys-a-blocage-automatique-59mm","title":"052642 - GYS automatic locking pulling clamp 59mm","description":"\u003ch2\u003eTechnical characteristics :\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Pulling clamp\u003c\/li\u003e\n\u003cli\u003eBrand: GYS\u003c\/li\u003e\n\u003cli\u003eMaximum opening: 59mm\u003c\/li\u003e\n\u003cli\u003eFeatures: automatic locking\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAdvantages and benefits :\u003c\/h2\u003e\n\u003cp\u003eThe 59 mm automatic locking pulling clamp offers several advantages to professional bodyworkers :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptimal pulling force :\u003c\/strong\u003e The pulling clamp provides optimal pulling force to help effectively straighten cracks and damaged body parts.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic locking :\u003c\/strong\u003e The automatic locking mechanism maintains a constant pulling force, thus avoiding frequent manual adjustments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGood ergonomics :\u003c\/strong\u003e The ergonomic design of the clamp ensures a comfortable grip and facilitates its use during straightening operations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsage tips :\u003c\/h2\u003e\n\u003col\u003e\n\u003cli\u003ePlace the pulling clamp on the area to be straightened on the bodywork, ensuring it is securely fixed.\u003c\/li\u003e\n\u003cli\u003eAdjust the desired pulling force using the automatic locking mechanism.\u003c\/li\u003e\n\u003cli\u003eApply progressive force to straighten the damaged part of the bodywork.\u003c\/li\u003e\n\u003cli\u003eRegularly check the state of the straightening and make necessary adjustments to achieve the desired result.\u003c\/li\u003e\n\u003cli\u003eMake sure to follow appropriate safety instructions when using the pulling clamp.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eProtection and safety\u003c\/h2\u003e\n\u003cp\u003eSafety advice when using the Automatic Locking Pulling Clamp - 59mm :\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eEye protection :\u003c\/strong\u003e Always wear glasses and eye protection to avoid any risk of debris or particle projection when using the clamp.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHand protection :\u003c\/strong\u003e Use safety gloves resistant to shocks and cuts to protect your hands from sharp edges or moving parts of the clamp. Make sure the gloves do not hinder your ability to properly handle the tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDo not hesitate to contact us to learn more.\u003c\/p\u003e","brand":"GYS","offers":[{"title":"Default Title","offer_id":50702364901719,"sku":"052642","price":192.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/files\/2854.jpg?v=1748596162"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0915\/0441\/0967\/collections\/Materiel_et_outillage_Reseau_d_air_Collection.jpg?v=1767804581","url":"https:\/\/color-box.eu\/en-int\/collections\/air-network-fittings-blowguns.oembed","provider":"ColorBox","version":"1.0","type":"link"}